1USER INSTRUCTIONSHEIGHT ADJUSTABLE TOILET FRAMEWITH SEATM11090 Height Adjustable Toilet Frame with SeatGeneral Safety WarningPlease make sure that you read and followthese instructions carefully. Keep theseinstructions in a safe place for future reference.Maximum User Weight30st190kg1. INTENDED USETo assist users when lowering onto and rising from the toilet. Primarily for use over the toilet using thesplash guard provided but also for use as a commode with the addition of a potty. The seat lid adds discreetstyle and helps to improve cleanliness and hygiene.Figure 1:2. SAFETYWARNING: The maximum user weight must not bemore than 190 kg (30 st).DO NOT attempt to stand or climb on the product.MAKE SURE all legs are set at equal height to avoidrocking.3. UNPACKINGRemove the packaging and check all parts carefully.Contact your supplier immediately if parts aremissing or damaged and do not try and assemble.4. INSTALLATION INSTRUCTIONSProduct arrives fully assembled.To adjust the height:• Remove the ‘E-clip’ and slide the legs to thedesired position.• Align the holes and re-insert the ‘E-clip’.• Repeat for all four legs.Ensure that all four legs are positioned at the sameheight to prevent rocking and instability.Place the frame over the toilet ensuring that theinternal splash guard is positioned centrally over thetoilet bowl.To fit M20303 - Commode PanFigure 2: M20303 Commode PanLift the seat and lid to slot the commode pan intoposition on the frame, see figure 3.Figure 3: M11090 with Commode Pan (M20303)fitted5. OPTIONAL FLOOR FIXING KITThe floor fixing kit provides a permanent fixingsolution for the Toilet Frame. It helps to preventthe frame from moving out of position or becomingunstable during use.