1USER INSTRUCTIONSSPA GRAB RAIL RANGEP01304 350 mm (14”) SPA Stainless SteelStraight Grab RailP01339 350 mm (14”) SPA Stainless SteelCurved Grab RailP01316 480 mm (19”) SPA Stainless SteelStraight Grab RailP01341 480 mm (19”) SPA Stainless SteelCurved Grab RailP01328 620 mm (24.5”) SPA Stainless SteelStraight Grab RailP01353 620 mm (24.5”) SPA Stainless SteelCurved Grab Rail1. INTENDED USEThe SPA Grab Rail range provides a stable supportto assist users to raise and lower themselves,and provides stability when overcoming everydayobstacles.Figure 1: Curved RailsFigure 2: Straight Rails2. SAFETYWarning: Do not exceed the Safe WorkingLoad.• The person that installs this product must besuitably qualified and competent.• Use only as a support to assist movement. Donot apply full weight to the rail.• Never drill through pre-stressed concrete toinstall a support rail.• Always check for concealed electrical cablesand water pipes when installing.• Check your legal requirements relating to earthbonding of metal parts.• Inspect product (to ensure the rail is unbroken,rigid, stable, and that the fixings & screws arefitted into place) at regular intervals. See section5.2.3. UNPACKINGRemove the packaging and check all partscarefully. Contact your supplier immediately ifparts are missing or damaged and do not try andassemble.3.1 Contents:1. Grab Rail2. Cover Plate (pre-fitted)3. Wall Bracket (pre-fitted)Note: Fixings are not supplied.General Safety WarningRead and follow these instructions carefully.Keep these instructions in a safe place forfuture reference.Safe Working Load30 st190 kg