NSI Solutions Rapid Z-CUT Instruction Manual
Also see for Rapid Z-CUT: InstructionsInstructionsInstruction manual
   |
www.nsisolutions.com English Rev C3” Rapid Z™-CUT (No Bearing)INSTRUCTION MANUALZ-CUTINTRODUCIONThank you for purchasing the NSI Solutions Rapid Z™-CUT. The Rapid Z™-CUT is a 3”, stacked blade type,grinding wheel designed to quickly grind stone and quartz. This version, without a top bearing, isdesigned to be used for free hand shaping or anywhere a template bearing is not required. Please readthese instructions thoroughly before using this tool. Keep these instructions in a place where operatorscan access it easily.Read and Understand All InstructionsFailure to follow all instructions listed below may result in electric shock, fire, and/or serious personalinjury. Additionally, observe all safety instructions provided with the electric and air tools.Use Proper Safety GearTo prevent damage to eyes from flying debris, wear protective glasses or face shield. Be sure to wearwaterproof safety boots, appropriate hearing protection and dust protection as required.Inspect before UseBefore each use, inspect the Rapid Z™-CUT for bent, cracked or otherwise damaged blades. Replacedamaged blades before use. Never use a Rapid Z™-CUT with damaged blades or other components.Wet Use OnlyThe Rapid Z™-CUT is designed for wet use onlyObserve maximum RPMMaximum RPM 12,000CautionAlways be sure that the grinder is switched off and unplugged from power (either electric or air)before installing/removing the Rapid Z™-CUT or attempting to perform any inspection ormaintenance.!!!!!Scan QR Code to see resources and videos regarding theRapid Z™ items or visit us at nsisolutions.com orYouTube channel NSITools.! |
Related manuals for NSI Solutions Rapid Z-CUT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine