NST MR1 Instruction Manual
Contents |
8. Overwrite settingSet【Yes】, overwrite data by loop recording1. Turn on / off when memory is full.9. Stop recording2. Language settingPress Menu joystick, enter menu screen, to【System setting】byEnter 【 Language setting】, enter again, select English. 10. Forced turn on/offThen press Menu again to exit, return to main menu. Press“Power On/Off”for 3 seconds for forced turn on/off.3. Date Time setting 11. Parking recordingEnter 【Date Time setting】, use joystick to adjust time clock.4. LCD back light setting (Energy saving)Select power on recording as LCD shown to have time set, for example,【3 min.】, screen will be shut down in 3 minutes but 12. Playback:Self replayrecording is still going.5. Power on recording13. Playback: Replay on PC6. Manual recordingSet 【Manual Rec.】auto recording won't go even engineis activated. 14. SD card used storagePress Enter, start recording (Rec indicator flicking) Access to system setting →【system info.】, then press EnterPress Enter again, stop recording (Rec indicator off) 『Total size』for Total SD storage (MB)7. Motion detection 『Usage size』for percentage of recorded file ( %)Enter 【Rec. setting】→ Motion detection, set mask area, 『Remain size』for percentage of recordable spare ( %)start recording when object's move is detected. 15. RESETThere are 5-10 seconds of pre-record once motion detection activatedHighly Sensitive 1/3" CCD Vehicle RecorderRec. setting>Power-off Delay, set【3 mins】, turn off engine,recording continues & will be stopped in 3 minutes; set 【0 mins】recording will be stopped as long as engine's off.Parking recording by “Forced turn on” until UPS 's out of battery.It can be carried as personal camera. Built-in UPS system continuepower supplying for 2 hours after LCD's shut down .Press“Menu”, then use joystick to enter 【Playback】, Enter again toselect time segment file, press Enter for replay or stop playing. Turnleft / right joystick for playing forward or reversed replay.Turn up / down it for choosing time of recording file.Shut down camera, draw SD card & insert it into PC (Card Readerneeded) to access file, then replay through Media play.Press Zoom + and Zoom - at the same time.P. 75.InstructionInsert the cable to cigarette lighter jack, device will automatically turnon when vehicle ignited and shut down automatically as car engine's off.Set 【Power on Rec.】, auto recording is on when car engine isactivated. Meanwhile, Rec. Indicator glitters as Rec. icon displaying onleft bottom screen, indicates that recording is on.P. 6Instruction ManualModel :MR11-512-756-1678 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine