1E-xD: RESTORE DEFAULTS VIA RS232This procedure is provided to enable the administrator to restore defaults to the E-5D\16D using the “RS232” port.Note: This procedure has been tested to work properly using Microsoft® HyperTerminal. We cannot confirm whetherother terminal programs will give satisfactory results.1.Connect one end of a CAT5 patch cable (supplied) to the port labeled “RS232” on the rear of the E-16D (or front of the E-5D).Plug the other end of the CAT5 cable into an RJ45-to-DB9F adapter (supplied), and connect the adapter to the RS232 port on thecontrol terminal.Connect a terminal for direct RS232 serial communication

NTI E D Series Manual