NXN IDT1-1420G Quick Installation Manual
          |
IDT1-1420G/GP Quick Installation GuideFirst Edition, May 20131. OverviewWelcome to NXN's iDT1-1420G/1420GP industrial cellular modem series. With 1 Port serialRS-232/422/485, 4 Digital Input, 2 Relay Out, the cellular modems that allow you to connect serialdevices to the GSM/GPRS network. Besides, iDT1-1420GP is embedded with GPS module which is suitablefor real-time GPS tracking applications.2. Package ChecklistBefore installing iDT1-1420G/GP, verify that the package contains the following items:3. Hardware IntroductionAs shown in the following figures, iDT1-1420G/GP the front has GSM antenna connector, six LEDindicators and two terminal blocks, one of terminal block for the RS-232/422/485 interface; another onefor digital input, relay out and power. The rear has terminal resistor switch, SIM slot and reset/consolebutton, for the RS-422/485 interface the terminal resistor switch for mount or unmounts internal terminalresistors on the wire, and iDT1-1420G only different with iDT1-1420GP is the iDT-1420GP has a GPSantenna connector for GPS receiver.IDT1-1420GIDT1-1420GP•1420GP Device•SIM Cover•GSM Antenna•GPS Antenna•Terminal block x 2•Female RS-232 cable x 1•iDT Document & Software CDIDT1-1420G•1420G Device•DIN-Rail Clip•GSM Antenna•Terminal block x 2•Female RS-232 cable x 1•iDT Document & Software CD |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine