Nakamichi NK12 Quick Start Manual
Also see for NK12: Manual
  |
High Definition Sound BarOpticalCableScrews and Bracketsfor Wall MountingRemoteControlSub-WooferAC cableSubwooferHome Theatre SystemNK12USE THE HDMI IN TV (ARC)SUBWOOFER LOCATIONHELP & TROUBLESHOOTINGQUICK START GUIDEIMPORTANT SAFETY INFORMATIONPACKAGE CONTENTSYour Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. Toprevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and maintenance. Please readthe following safety instructions before operating your Sound Bar. Keep these instructions in a safe place for future reference.• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Sound Bar.USING THE REMOTETip: For best results, point the remote at the right side of the sound bar where the LCD indicator islocated. The sensor is located there.If your remote stops responding, you may need to replace the battery. To replace the battery, open thebattery compartment, and then replace the old battery with a new CR2025. Be sure that the + sign onthe battery is facing up.There is no power.• Press the POWER button on the remote control or on the side of your Sound Bar.• Ensure the power cord is securely connected.• Plug a different device into the electrical outlet to verify that the outlet is working correctly.• To conserve power, the Sound Bar will be in standby mode automatically after 30 minutes if not in use.There is no sound.• Increase the volume, Press Volume Up on the remote control or on the side of your Sound Bar.• Press MUTE on the remote to ensure the Sound Bar is not muted.• Select a different input source (HDMI In TV (ARC), AUX, Line-in, Optical or Bluetooth).• Be sure the audio cable coming from the TV is connected to an audio output, not an audio input.• If listening to an Digital source, be sure the source is set to PCM.I hear buzzing or humming.• Ensure all cables and wires are securely connected.• Connect a different source device (TV, Blu-ray player, etc.) to see if the buzzing persists. If it does not, the problemmay be with the original device.• Connect your device to a different input on the Sound Bar.Place the wireless subwoofer anywhere in the room. For the best sound,place the subwoofer near a wall or corner within 20 feet (6 meters) of thesound bar on the same side of the room as the sound bar. The wirelesssubwoofer range is 25 feet (8 meters).PULL OUT THE PLASTICSHEET BEFORE USING.RCA CablePress to switch the sound bar ONand OFF.Press to adjust the brightness ofthe LED display indicator.Press to select HDMI-IN TV (ARC)Digital input source.Press to select AUX-IN (RCA)Analog input source.Press to select AUX-IN (3.5mm)Analog input source.Press to select OPTICAL Digitalinput source.Press to select Bluetooth inputsource.Mute. Press to turn the sound on or off.Select the MOVIE EQ effect.Select the NEWS EQ effect.Select the MUSIC EQ effect.Select the SPORTS EQ effect.In Bluetooth mode, Press to enter pairingor Bluetooth reset mode.Press to set a time to switch device off.(90 mins,60 mins,30 mins,15 mins or OFF)Volume Up. Press to increase overallsystem volume.Volume Down. Press to decreaseoverall system volume.In Bluetooth mode, press to controlmusic to PREVIOUS track.In Bluetooth mode, press to controlmusic PLAY or PAUSE.In Bluetooth mode, press to advancemusic to NEXT track.The ARC (Audio Return Channel) function allows you to send audio from your ARC- compliant TV to your sound bar througha single HDMI connection. To enjoy the ARC function, please ensure your TV is both HDMI-CEC and ARC compliant andset up accordingly. When correctly set up, you can use your TV remote control to adjust the volume output (VOL +/- andMUTE) of the sound bar.- Ensure to use an HDMI cables that can support the ARC function.- HDMI-CEC will be called different namesby different manufacturers - please refer toyour owner’s manual for details on settingup HDMI-CEC and ARC.Connect the HDMI cable from yoursound bar’s HDMI In TV (ARC) socketto the HDMI (ARC) socket on yourARC- compliant TV. Then press theremote to select TV-HDMI. TVHDMI (ARC)HDMI cables(not included)*Cables may vary slightly from those shown. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine