Napa 791-7125 Operating Manual & Parts List
          |
791-7125 1 rev. 12/07/15Low Height................................................................................700 lbs.Adjustable Hook Screw Length ...................................................... 14"Steel Cable Diameter ..................................................................... 1/8"Support Bar Adjustment ................................................... 34.5" to 61"Shipping Weight ...................................................................25.24 Lbs.Model # 791-7125capacity: 700 lbs.ENGiNE tRaNsVERsE baRWitH aRM sUppORtRead, study, understand and follow all instructions beforeusing • Inspect before each use. Do not use if damaged,altered, modified, in poor condition, or has loose or missinghardware or components. Take corrective action beforeusing • Do not use beyond rated capacity • This EngineTransverse Bar was not designed to lift an engine but rathersupport the engine when lifted by other means • Consultthe vehicle manufacturer for the proper positioning andattachment of the tool to the engine • Wear eye protectionthat meets ANSI Z 87.1 and OSHA standards (users &bystanders) • Make sure the engine is properly and safelysupported before removing the lifting device from theengine • Stay clear of lifted load. Never crawl underthe suspended load for any reason • Do not exceedmaximum width of 61" • No alterations shall be made to thisdevice • Make sure the weight of the tool and engine canbe supported by that part of the vehicle the tool is resting• Do not use this tool for any purpose other than for whichit was designed • This product contains chemicals knownto the State of California to cause cancer and birth defectsor other reproductive harm. Wash hands thoroughly afterhandling • Failure to heed these warnings may result inserious or fatal personal injury and/or property damage.SPECIFICATIONSWARNINGBEFORE USING THIS DEVICE, READ THISMANUAL COMPLETELY AND THOROUGHLY,UNDERSTAND ITS OPERATINGPROCEDURES, SAFETY WARNINGS ANDMAINTENANCE REQUIREMENTS.It is the responsibility of the device owner to make sure all personnelread this manual prior to using the device. It is also the responsibilityof the device owner to keep this manual intact and in a convenientlocation for all to see and read. If the manual or product labels are lostor not legible, contact NAPA for replacements. If the operator is notfluent in English, the product and safety instructions shall be read toand discussed with the operator in the operator's native language bythe purchaser/owner or his designee, making sure that the operatorcomprehends its contents. |
Related manuals for Napa 791-7125
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine