Luna Fire™ RXUSAGE INSTRUCTIONS>> To turn on, press and hold power button (1) for 2-3 seconds.>> Press repeatedly to cycle through modes. Double click the power button to activatestrobe from any other mode. Single click to return to low mode.>> To turn off, press and hold power button for 2-3 seconds.1TO RECHARGE:>> Plug supplied USB cord in to a USB power source (500mA minimum) and then pluggently in to the covered charge port on the back of the unit. A red LED will light upto indicate charging is occurring and a green light indicates the Luna Fire RX is fullycharged.>> Charge time is 3 hours for a fully depleted battery.>> When fully charged, unplug Luna Fire RX from USB power supply, return port covergasket to original position and store charger cord until next use.

Nathan Luna Fire RX Usage Instructions