National Instruments 9775 Calibration Procedure

Also see for 9775: Getting started guide

National Instruments 9775 Calibration Procedure Manual pdf 1 page image

CALIBRATION PROCEDURENI 9775±10 V, 20 MS/s/ch, 14-Bit, 4-Channel C Series Digitizer ModuleThis document contains the verification and adjustment procedures for the NI 9775. For moreinformation on calibration, visit ni.com/calibration.SoftwareCalibrating the NI 9775 requires the installation of NI-DAQmx 17.6 or later. You candownload NI-DAQmx from ni.com/downloads. NI-DAQmx supports LabVIEW,LabWindows™/CVI™, C/C++, C#, and Visual Basic .NET. When you install NI-DAQmx, youonly need to install support for the application software that you intend to use.DocumentationConsult the following documents for information about the NI 9775, NI-DAQmx, and yourapplication software. All documents are available on ni.com/manuals and help files install withthe software.• NI cDAQ-9174/9178 USB Chassis Quick Start• NI 9775 Datasheet• NI 9775 Getting Started Guide• NI-DAQmx Readme• LabVIEW Help• NI-DAQmx C Reference Help• NI-DAQmx .NET Help Support for Visual StudioTest EquipmentThe following table lists the equipment recommended for the performance verification andadjustment procedures. If the recommended equipment is not available, select a substituteusing the requirements.