National Instruments FP-CTR-500 Operating Instructions Manual

Also see for FieldPoint cFP-CTR-502: Operating instructions

Contents

specifications

National Instruments FP-CTR-500 Operating Instructions Manual Manual pdf 1 page image

323323B-01 June 2003© 2002–2003 National Instruments Corp. All rights reserved.FieldPoint™, National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation.Product and company names mentioned herein are trademarks or trade names of their respective companies.For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software,the patents.txt file on your CD, or ni.com/patents.FieldPoint Operating InstructionsFP-CTR-500 andcFP-CTR-500Eight-Channel, 16-Bit Counter ModuleThese operating instructions describe how to install and use theNational Instruments FP-CTR-500 and cFP-CTR-500 countermodules (referred to inclusively as the [c]FP-CTR-500). Forinformation about configuring and accessing the [c]FP-CTR-500over a network, refer to the user manual for the FieldPoint networkmodule you are using.FeaturesThe [c]FP-CTR-500 is a FieldPoint counter module with thefollowing features:• Eight 16-bit counters with individual count input terminals• Four gate-input channels configurable as either gates or digitalinputs• Four output channels configurable as either generic digitaloutputs or associated outputs for the count-input channels• Sinking inputs and sourcing outputs, compatible with12 or 24 VDC devices• Internal frequency references of 1 kHz and 32 kHz• Internally cascadable counters• Software-enabled 50 kHz or 200 Hz lowpass filter oncount-input channels• On/Off LED indicators• 2,300 V rms transient overvoltage protection• Hot swappable