NOTE TO USERSInstalling EMI SuppressionFerrites for the NI PCI-6154To ensure the specified EMC performance of the NI PCI-6154, you must install two snap-onferrite cores, included with your device, onto each end of the I/O cable you use to connect to theNI PCI-6154 device.The snap-on ferrite cores must be installed on the I/O cable as close to each end connector aspossible and securely locked, as shown in the following figure.You can order additional EMI suppression ferrites from NI (part number 711627-01).1 Ferrite (NI Part Number 711627-01)2 NI DB37M-DB37F-EP I/O Cable (NI Part Number 193737-01)12

National Instruments PCI-6154 Note To Users