National Instruments PXIe-5764 Safety, Environmental, And Regulatory Information

Also see for PXIe-5764: Getting started guide

National Instruments PXIe-5764 Safety, Environmental, And Regulatory Information Manual pdf 1 page image

SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATIONPXIe-576416-Bit, 1 GS/s, 4-Channel PXI FlexRIO DigitizerRead this document and the documents listed in the additional resources section about installation, configuration, and operation of this equipment before youinstall, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition torequirements of all applicable codes, laws, and standards.Regulatory IconsNotice—Take precautions to avoid data loss, loss of signal integrity, degradation of performance, or damage to the model.Caution—Take precautions to avoid injury. Consult the model documentation for cautionary statements when you see this icon printed on the model.Cautionary statements are localized into French for C-UL certification.Warning—Take precautions to avoid electrical shock.SafetyCaution Observe all instructions and cautions in the user documentation. Using the model in a manner not specified can damage the model andcompromise the built-in safety protection. Return damaged models to NI for repair.Attention Suivez toutes les instructions et respectez toutes les mises en garde de la documentation utilisateur. L'utilisation d'un modèle de toute autrefaçon que celle spécifiée risque de l'endommager et de compromettre la protection de sécurité intégrée. Renvoyez les modèles endommagés à NI pourréparation.Safety Voltage and FrequencyNotice The protection provided by the PXIe-5764 can be impaired if it is used in a manner not described in the user documentation.Maximum input voltage ±2 VFrequency 1.3 GHzEMC GuidelinesThis product was tested and complies with the regulatory requirements and limits for electromagnetic compatibility (EMC) stated in the product specifications.These requirements and limits provide reasonable protection against harmful interference when the product is operated in the intended operationalelectromagnetic environment.This product is intended for use in industrial locations. However, harmful interference may occur in some installations, when the product is connected to aperipheral device or test object, or if the product is used in residential or commercial areas. To minimize interference with radio and television reception andprevent unacceptable performance degradation, install and use this product in strict accordance with the instructions in the product documentation.Furthermore, any changes or modifications to the product not expressly approved by National Instruments could void your authority to operate it under yourlocal regulatory rules.Notice Operate this product only with shielded cables and accessories. Do not use unshielded cables or accessories unless they are installed in ashielded enclosure with properly designed and shielded input/output ports and connected to the product using a shielded cable. If unshielded cables oraccessories are not properly installed and shielded, the EMC specifications for the product are no longer guaranteed.Physical CharacteristicsWeight (unloaded) 190 g (6.7 oz)Dimensions 3U, one-slot PXI Express module, 18.8 cm × 12.9 cm (7.4 in. × 5.1 in.)MaintenanceClean the hardware with a soft, nonmetallic brush. Make sure that the hardware is completely dry and free from contaminants before returning it to service.

/ 4

Related manuals for National Instruments PXIe-5764