National Instruments PXIe-8115 Installation Manual

Also see for PXIe-8115: User manual

National Instruments PXIe-8115 Installation Manual Manual pdf 1 page image

INSTALLATION GUIDENI PXIe-8115This document contains information about installing the NI PXIe-8115controller in a PXI Express chassis. For complete configuration andtroubleshooting information (including information about BIOS setup,adding RAM, etc.), refer to the NI PXIe-8115 User Manual. The manual isin PDF format on the documentation CD included with the controller andon the National Instruments Web site, ni.com.Installing the NI PXIe-8115This section contains general installation instructions for theNI PXIe-8115. Consult the NI PXIe-8115 User Manual for specificinstructions and warnings.1. Plug in the chassis before installing the NI PXIe-8115. The power cordgrounds the chassis and protects it from electrical damage while youinstall the module. Make sure the power switch is turned off.Cautions In some National Instruments chassis, such as the NI PXIe-1082, you mustensure that the power LED is off. For more information about chassis power behavior, referto the user manual for the specific chassis.To protect both yourself and the chassis from electrical hazards, leave the chassis off untilyou finish installing the NI PXIe-8115 module.2. Remove any panels blocking access to the system controller slot(slot 1) in the chassis.3. Touch the metal part of the case to discharge any static electricity thatmight be on your clothes or body.4. Remove the protective plastic covers from the four bracket-retainingscrews as shown in Figure 1.

/ 4

Related manuals for National Instruments PXIe-8115