National Instruments SCXI 1346 Installation Manual

National Instruments SCXI 1346 Installation Manual Manual pdf 1 page image

LabVIEW ™ , Measure™ , National Instruments ™ , ni.com™ , PXI™ , and SCXI ™ are trademarks of National Instruments Corporation. Product and companynames mentioned herein are trademarks or trade names of their respective companies.320722B-01 © Copyright 1994, 2000 National Instruments Corp. All rights reserved. November 2000INSTALLATION GUIDESCXI -1346 SHIELDED MULTI -CHASSISCABLE ADAPTERThis guide describes how to connect and configure a multi-chassisSCXI system using the SCXI-1346 shielded multi-chassis cable adapter.IntroductionUsing the SCXI-1346, you can connect a multi-chassis SCXI system toyour data acquisition (DAQ) device. The SCXI-1346 connects any 68-pinE Series DAQ device, excluding 61XXE devices, to any SCXI module,excluding the SCXI-1127, SCXI-1128, SCXI-1190, and SCXI-1191.The SCXI-1346 is a connector assembly with four connectors:• A 68-pin male connector on the front panel of the adapter, labeledTO NEXT CHASSIS• A 68-pin male connector on the front panel of the adapter, labeledFROM DAQ BOARD OR PREVIOUS CHASSIS• A 50-pin, male breakout connector on the printed-circuit board of theadapter• A 50-pin, bracket-mounted female connector on the rear of the adapter™