National Instruments SCXI NI 1357 Installation Manual

National Instruments SCXI NI 1357 Installation Manual Manual pdf 1 page image

INSTALLATION GUIDENI 1357/1358/1359SCXI Controller/Adapter KitThis document describes the components, installation, and configurationof the National Instruments SCXI-1357/1358/1359 and theNI USB-1357/1358/1359 controller/adapter kits. The SCXI kit connectsa switch controller to an SCXI switch module; the USB kit connects acomputer to an SCXI switch module. Both SCXI and USB kits createa high-voltage analog backplane and share high-voltage signals amongswitches.IntroductionNote Both SCXI and USB kits connect to an SCXI switch with a 10-pin rear connector.Refer to the NI Switches Getting Started Guide to determine the switches and switchcontrollers that your kit supports.The NI 1359 kit (2 slots) consists of the following components:• NI USB-1359(2-slot high-voltage analog bus (HVAB) backplane adapter withUSB connector)orNI SCXI-1359(2-slot HVAB backplane adapter with 9-pin DIN connector)• SH9MD-9MD cable (SCXI kits) or USB cable (USB kits)The NI 1358 kit (12 slots) consists of the following components:• NI USB-1359 or NI SCXI-1359• One 8-slot HVAB backplane adapter• NI SCXI-1359™̭͈Ρ΅νιϋΠ͉ͅȂ඾ུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ