National Public Seating CONDUCTOR'S STAND Assembly Instructions Manual
  |
ASSEMBLY INSTRUCTIONSCONDUCTOR'S STAND1-800-261-4112Page 1 of 2 www.nationalpublicseating.comCONDUCTOR'S STAND COMPONENTS1x DeskA1x TrayB1x BaseE2x GlideF1x TelescopicClamp LockC1x TelescopicTubeDTOOLS FOR ASSEMBLY3.0 AllenWrench1x74.0 AllenWrench1x8Small OpenEnd Wrench1x9Large OpenEnd Wrench2x101 Using the 3.0 Allen Wrenchloosen the base end M5x8 Boltsso that the Base has someclearance, then remove the M6x50Bolts and M6 Lock Nutsusing 4.0 Allen Wrench andSmall Open End Wrench .E712 398392E172Ensure that all bolts are fastened tightly.Install Conductor's Base to Telescopic Tube as follows: Begin byInserting the telescopic tube through the base. Align the two base holesover two holes on telescopic tube. Insert two M6x50 Bolts and tightenwith two M6 Lock Nuts using 4.0 Allen Wrench and Small Open EndWrench .E D23 89ED8284 |
Related manuals for National Public Seating CONDUCTOR'S STAND
National Public Seating CoGo Assembly Instructions Manual
National Public Seating CTS Assembly Instructions Manual
National Public Seating TAD Assembly Instructions Manual
National Public Seating SLT1 Assembly Instructions Manual
National Public Seating DY82 Assembly Instructions Manual
National Public Seating COGO Series Assembly Instructions Manual
National Public Seating 600 Series Assembly Instructions Manual
National Public Seating 13807920 Assembly Instructions Manual
National Public Seating SLT3-2448P Assembly Instructions Manual
National Public Seating BPFT-2472 Assembly Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine