Nauticam M67 Instruction Manual

Nauticam M67 Instruction Manual Manual pdf 1 page image

Current as of 2019-03-18Instruction Manual forM67 Double Flip Holderfor M67 Macro PortsPN# 25108FOREWORDThank you for your purchase of a NAUTICAM product.At NAUTICAM, we pride ourselves in the ability to recognize therequirements of professional as well as amateur underwaterphotographers and fulfill them through the innovative designs of ourproducts. We strive to achieve a high level of user-friendliness byallowing stress-free installation and easy operation of all importantfunctions of the camera.Please read this manual carefully before using the product, this willmaximize its performance as well as its lifetime.WARRANTYAll NAUTICAM Products are warranted against any material andmanufacturing defects for two years from the date of purchase forconsumer use. This warranty only applies to products purchased fromauthorized NAUTICAM dealers and does not extend beyond the originalretail purchaser.To return your product for service, please contact your regionalauthorized service center(s). Please note that this warranty only applieswhen the product is purchased in the territory where the service centeris located.NAUTICAM does not hold responsibility for damage, of any nature, toany equipment used with and/or placed within our products.NAUTICAM accepts no liability for any loss of captured images or theinability to capture images even if it is due to the malfunctioning of ourproducts.Unauthorized modifications and/or repairs of our products willautomatically invalidate the warranty.INSTALL TO THE PORT1. Press the lever and flip the holder to the side2. Remove the locking ring from the flip holder3. Align the two positioning screws on the backof the holder with the slots on the front ofthe port.The position of the flip holder can bechanged by relocating the two screws in thethreaded holes around holder.

/ 2

Related manuals for Nauticam 25108