Nedap Cube Card Reader 190 Install Manual

Nedap Cube Card Reader 190 Install Manual Manual pdf 1 page image

Date: 08 April 2013 Version: BThis information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or otherright, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change withoutPart.no.: 9209735Cube Card Reader 190Nedap Mifare readersGENERALThe Cube card reader 190 series is capable of reading Mifare and DESFirecredentials due to its dual reader technology. The Cube card reader 190 isdesigned to be used on door pillars (mullion) and suitable for outside andinside use. A model with keypad is also available.Functionality and output is determined by the configuration of the Cube cardreader. The configuration is defined using the programm AEmon, anddeployed via AEmon.Three LEDs (red, green, blue) and beeper are included. LEDs around thekeypad ciphers light up only in case a PIN code is requested.The pigtail cable can be lead directly backwards.DIMENSIONSMOUNTING PROCEDURE 190For mounting the Cube card reader 190, the mounting plate must be placedon the wall first.For removing the mounting plate from the Cube card reader 190, unscrewthe screw (1) (Torx, M5) at the bottom of the Cube card reader 190 and pushthe Cube card reader 190 slightly up (2). The plate can be mounted using the4 holes.Place the cable to the correct position and replace the Cube card reader 190.®Install manualDimensions: 7.52 x 2 x 1.2 in.4 mounting holes available at 1.26 x 6.1inCable pigtail: 10 x 26AWG shielded, 10 ftOptional spacer (max thickness 0.4 in) isavailable for other cable outlet (top orbottom)Un screwPush up21Mountingplate1 1913010 x 26AWGShield321551240 14.5504 x 575Note: drawing dimensions are in mm

/ 4

Related manuals for Nedap Cube Card Reader 190