Floodlight Range Installation GuideZone 1 variant CML13ATEX3007 or IEC Ex CML14.0001 or CML 21UKEX3099Zone 2 variant CML17ATEX4231 or IEC Ex CML 17.0135 or CML 21UKEX4106This installation guide provides instructions for installing the RF series ofexplosion protected floodlights.Text in Bold is specific for emergency variantsOverview1 Safety Instructions2 Installation3 Maintenance4 Technical Specification5 Trouble ShootingImportant informationThe RF series of explosion protected floodlights are specialist devices, certified for usein specific operating environments.The units must be installed in accordance with these instructions, must be correctlycertified for the specific operating environment and must be installed by suitablyqualified personnel.Emergency floodlights will require the fuse to be reconnected upon installationand the floodlight subjected to three 24 hour charge/discharge cycles to bringthe battery up to peak capacity.If you have any queries about the installation or the certification of the unit – pleasecontact Nemalux for immediate assistance and advice.RF Seriesrev. A-211-12www.nemalux.com | sales@nemalux.com | Tel 403•242•7475 | Fax 403•243•6190SUBJECT TO CHANGE WITHOUT NOTICEMADE IN UK