Neodrain ZA3-24-T02-GD Installation Instructions Manual
Also see for G03: Installation guide
    |
Stainless strainer / Hair catcherDrain body / ChannelThreaded adaptor / Height adjustableGrate & strainer lifting hookLeveling feet / 2 PCSProtective fabric23456Please be sure to read carefully before installation.Three styles of stainless steel grating options available: (NOTE : Pedestrian loading only.)Grating and PartsPreparationThe substrate should be smooth, level, clean and free of all dirt, oil, laitance, paint, concrete sealers or curing compounds.Dry dusty concrete slabs or masonry should be dampened and excess water swept off.The following tools and materials maybe needed: Hole Saw, Crescent Wrench, Level, Utility Knife, Ruler or Tape measure,Pencil, Notched Trowel, Weep protectors, Silicone, Solvent Cement.For the traditional type of waterproofing, the professional should build a shower pan in the wet /shower area with PVC, Vinyl, Leador Fiberglass material, then the drain usually connect to the waste line with a mechanical clamp down drain flange (drain base), somemodel do not include such flange and need separately purchase before installation.1. Please read this installation instructions carefully before proceeding.2. Thoroughly inspect the product and components, contact our support team with report anysupport @neodrain.com todamaged or missing components for a replacement, return or repair.3. Consult local building codes to ensure the installation complies with standards in your area. The warranty will be void ifthe product is installed with a conspicuous defect.4.We recommend a flow rate no greater than 12 GPM for use with this product. The load-grade allow pedestrian walking only.5. The information provided in this instruction are general guidelines and a licenced professional should always be usedduring installation.( *12" do not use leveling feet.)CA 2022.4 |
Related manuals for Neodrain G03
manualsdatabase
Your AI-powered manual search engine