Assembly InstructionsPackage contents:Follow these easy steps:13241 - Base1 - Top Circular Perch1 - Hammock Shaped Perch2 - Large Carpeted Post1 - Sisal Rope Post1 - Carpeted Post1 - Platform1 - 4" Carpet PostPlace the platform onto the posts aligning the holes of the platform and the posts. Screw in the largecarpeted post through the platform and into the lower post and screw in the 4" carpeted post through theplatform and into the lower post. As posts begin to feel snug, continue to turn posts slowly to avoiddamaging, twist until tight. (See figure 2)Take the other large carpeted post and screw into the base hole on the left side of the product. Take thehammock shaped perch and screw into the carpeted post. As the hammock shaped perch begins tofeel snug continue turning slowly to avoid damaging, twist until tight. (See figure 3)Take the circular perch and screw it onto the top of the single post rotating in a clockwise direction.As the circular perch begins to feel snug, continue to turn slowly to avoid damaging, twist until tight.(see figure 4)In a large, open area, open the box and remove all contents. Take theindividual sisal post and the same length carpeted post and screw it into thebase rotating in a clockwise direction. As posts begin to feel snug, continue toturn posts slowly to avoid damaging, twist until tight. (See figure 1)Manufactured by New Cat Condos