Turning On the Display1. Press the Power button on the bottom right side of the display.2. The button will change color from red to blue once the display is powered on.Connecting a Computer1. Any device currently connected to the display will light up in white in the SourcePreview window on the home screen.2. Tap the icon of the Source you want to switch to.3. The Source Preview window will show a preview of what is currently on the screenof that connected device.4. Tap the icon of the Source a second time or tap the Preview window and you willbe taken to that source.5. Plugging your device into the front ports will automatically bring up the device onscreen.Switching SourcesQ Series Cheat Sheet1. You will need an HDMI cable and a USB A to B cable to connect a computer.2. On the front or side ports of the Q Series, plug in one end of the HDMI cable intoone of the HDMI ports.3. Take the other end of the HDMI port and plug it into the HDMI port on yourcomputer.4. Plug in the USB-B end of the USB cable into one of the front or side ports labeled“USB Touch.”5. Take the USB-A end of the USB cable and plug it into the USB port on yourcomputer.6. Once both cables have been plugged into the display and the computer, thematching port should turn white on the Source Preview on the Home Screen.Connecting a Computer with USB & HDMI1. You will need a USB Type-C cable to connect a computer.2. Plug in one end of the USB-C cable into the front or side USB-C port.3. Take the other end of the USB-C port and plug it into the USB-C port on yourcomputer.4. Once both cables have been plugged into the display and the computer, thematching port should turn white on the Source Preview on the Home Screen.Connecting a Computer with USB-CFront Ports with USB Type-B and HMDI cableconnected.Front Ports with USB Type-C cable connected.There are five ports located on the bottom left-hand side of the front of the panel:USB Touch, HDMI, USB 3.0, USB Type-C with 65 watts power delivery, and mic-in.The Front Ports