Nidec ST-329 Operation Manual
The ST-329 is a permanent mount stroboscope array utilizingsuper bright CREE high powered LED lamps. The ST-329’s LEDarray provides a bright, stable strobe light over a wide measure-ment range with a lifetime far exceeding xenon lit stroboscopes.The ST-329 arrays are available in several standard sizes from9.25” (235 mm) to 65” (1650 mm) in length. Custom sizes areavailable upon request. The arrays are easily mountable on pro-duction equipment. An optional mounting adapter kit is availableto aid in array installation. A separate control enclosure is con-nected with 6.5’ (2 m) cable to the array. Operation is simple withthe 8 button keypad and large, backlit LCD display. Phase shift,flash duration, plus flash rate are all quickly adjustable via the con-trol. The unit can work off user programmed flash frequency orfrom a remote sensor’s signal which will automatically adjust tocorresponding process fluctuations.The ST-329 is designed for speed and frequency measurementsin the printing, packaging, textile, automotive, cable, mining, steel,chemical, optical, medical and shipbuilding industries in variousapplications.ST-329 LED Stroboscope ArrayOperation ManualUse in flammable environments is prohibited. Use in this manner mayresult in fire or explosive.Don’t look directly into the LED light Source. This may result in eye in-jury.Don’t use or store in the following environments. Direct sunshine con-densation, dust or caustic.Do not alter, or modify of improperly. Such action may cause damageand void warranty.Operate with 0-35°C (32-95°F), 35-85% RH. Use outside of this rangemay alter operation of the unit.Case may become excessively hot when used continuously for morethan 2 hours. Mount unit on a tripod or other fixed device.SPECIFICATIONSFlash Rate Range: 60 to 120,000 FPMAccuracy: 0.01%±1 digit of F.S. @ 77° F (25°C)Lamp Lifetime: Approximately 3~5 years depending on usage.Display: Backlit LCDResolution: 60 ~12,000 FPM = 0.1 FPM; 12,001~120,000 FPM= 1 FPMFlash Duration: 0.1°- 2.5°Phase Shift: 0-359°Power Requirement: 100-120 VAC; Optional 220-260 VACInput Signal: 12 V Pulse Input; M-12, 3 pinInput Signal Range: 60-120,000 FPMInput Pulse Width: Over 50 μsInput Signal Flash Delay: 0-999 ms; 0-359°Temperature Limits: 32-95°F (0-35°C)Humidity Limits: 35 to 85% RHEnclosure: Control - ABS; Array - ABS window & aluminumframeMounting: Control: Magnetic mount to included bracket; Array:Flanges for use with 6 mm bolts. Mounting bracket kit availableseparately.Enclosure Rating: IP65 - Control & ArrayDimensions: Length (See chart on page 6) x 6” (153 mm) x 3.5”(90 mm)Approvals: CEWarranty: 1 yearIncluded Accessories: 6.5’ (2 m) AC power cord, 9.8’ (3 m)control/array connection cable (5 pin)Operation Panel Located on Control EnclosurePOWER: Power on and off.MODE: Select mode of operation or Parameter Menu: Internal/External/Parameter SettingsSET: Adjust Phase Shift; In Parameter Menu scroll through param-eter settings, Store setting values.x2: Multiplies the flash rate/frequency by a factor of 2.1/2: Divides the flash rate/frequency by a factor of 2.RATIO: Adjusts flash duration (flash pulse width) in Internal/Ex-ternal modes.“+”: Advance image forward 3 degrees at a time in internal mode.In parameter setting mode, adjusts setting values.“-”: Retard image backwards 3 degrees at a time in internal mode.In parameter setting mode, adjusts setting values.Dial: Set flash rate or frequency. CW: Increase flash rate/frequen-cy. CCW: Decrease flash rate/frequency. (Turn dial quickly todrastically change value; Turn dial slowly to change value by 1digit.) In parameter setting mode, CW or CCW rotation chang-es the setting value. Dial |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine