NightSearcher LITE-TOWER-X2 User Manual
 |
Mode operation - Product information - WarningOperation- Press the ON/OFF switch to turn on the Lite Tower on full power- Press again for the low power setting- Press a third time to activate the RED FLASHING light- Press a fourth time to turn off the light- Press and hold the switch for 3 seconds to activate the RED light SOS mode.Battery Installation & replacement- Remove powerpack cap. Remove the old batteries and insert new batteries according to the polarities labels. Replacepowerpack cap.- Remove batteries if you are not using the light for a long period or before storage- Only use AA alkaline batteries- NOTE : In order to protect the unit – please ensure that the battery’s polarity matches the polarity label. Reverse polaritymay damage the circuit.Warning- Do not flash the light beam directly to people’s eyesGeneral Warning- Do not mix new batteries with used batteries or mix batteries from different battery manufacturer or from different type- Remove the batteries when unused for a period of time to prevent battery leakage in the deviceUtilisation - Information produit - AvertissementMode de fonctionnement- Appuyer sur l’interrupteur ON/OFF pour allumer votre Lite Tower à pleine puissance (illumination 360°)- Appuyer une seconde fois pour l’intensité lumineuse faible (illumination 360°)- Appuyer une troisième fois pour activer le ROUGE CLIGNOTANT (illumination 360°)- Appuyer une quatrième fois pour éteindre votre lampe.- Appuyer et maintenir l’interrupteur pendant 3 secondes pour activer le mode SOS lumière rouge.Installation des batteries- Retirez le couvercle du powerpack. Retirer les anciennes piles et insérer de nouvelles piles selon les étiquettes de polarité. Remettrele couvercle du powerpack.- Retirez les piles si le produit n’est pas utilisé pour une longue période ou stocké.- Utilisez uniquement des piles alcalines AA.NOTE: Afin de protéger l'unité - assurez-vous que la polarité de la batterie correspond à l'étiquette de polarité. L’inversion de polaritépeut endommager le circuit.Maintenance- Ne regardez pas directement la LED. Cela peut endommager la vue.- NE PAS exposer la batterie au feu / températures élevées ou à des conditions de froid / humide extrêmes.GUARANTEE TERMSNightSearcher products have been carefully tested and inspected before shipment and are guaranteed to be free from defectivematerials and workmanship for a period of 12 months (battery not covered) from the date of purchase, provided that the enclosedinstructions have been followed. Should you experience problems with your NightSearcher product, please return the item, completewith any chargers, to your place of purchase or contact NightSearcher Ltd direct. Your NightSearcher guarantee does not apply toconsumables (LEDs and battery), normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling,alterations, accidents or repairs attempted or made by any personnel without prior approval from NightSearcher Ltd. YourNightSearcher guarantee is not effective unless you can provide a dated proof of purchase. Please note that this guarantee does notaffect your statutory rights. If at any time, you need to dispose of this product or parts of this product: Please note that wasteelectrical products, batteries and bulbs should not be disposed of with household waste. Please recycle where facilities exist, checkwith your local authority for recycling advice.NIGHTSEARCHER LIMITED - Unit 4 Applied House - Fitzherbert Spur – Farlington – Portsmouth – PO6 1TT – UNITED-KINGDOMVisit our website on www.nightsearcher.com Light Source 4 dual color ultrabright LEDLight Output (lumens) 55 24 Red flashRunning Time 3h 10h30 24hBattery 2 x AA AlkalineProduct Dimensions (Dia) 43 x (L) 112.3 mmProduct Weight 82 g (excluding batteries)NS Part No NSLITETOWER-X2Supplied with 2 x AA alkaline batteriesLITE-TOWER-X2 - User ManualON / OFF switch |
Related manuals for NightSearcher LITE-TOWER-X2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine