Niigata seiki MU-130 Instruction Manual
  |
To PCUSB PortConnectUSB Cable USB ConnectorMU-1301/3.2 CMOS130M Pixels30Frames/sec.USB 2.0Supplied by USB portWIndows XPS P3 Vista 7 8 10SPECIFICATIONSINSTRUCTIONMANUALModelSensorPixel CountFrame RateInterfacePower SupplySupported OSapprox.175gWeight (Body + Lens)AccessoriesSoftware CDBore Adapters:φ23.2 φ30.0 1φ23.2φ30.5 1USBCable ~1.5m 1MicroscopeInsertConn. Conn.BoreAdapterCamera LensCamera BodyCamera bodySelect one of the two adapters to fit themicroscope.Remove the eyepiece from the microscope.② Remove the Lens Caps from the Camera Body and the Lens.③ Follow the diagram below to connect.PART NAMES & ASSEMBLYMin. recommendedPC requirementsCPU: 2.4GHz clockMemory: 1GBHard Drive: 10GB Free spaceW hen MU-130 Camera is connected to the PC USB port using the cable, thefollowing message will appear in the bottom right corner of screen. Please proceed.Screen appearance will vary for different PC settings.Keep the MU-130 camera connected to the USB port and continuewith the additional installation steps.Keep the MU-130 camera connectedto the USB port and continue with the additional installation steps.When the installation guide screenappears, click on "Accept and Install" tocontinueClick on the "Browse" button to specify thedirectory for installation; when done click on"Install" to start the installation.Click on "Finish" when the installation iscomplete.To start the software immediately onceinstallation is complete, check the boxlabeled "Run application now"The icon shown to theright will be placed on thedesktop when the viewersoftware is installed.Administrator privileges for computer are required for installation.ScopeImage 9.0Thank you for purchasing the USB Microscope Camera. Please read this instructionmanual thoroughly before use to insure proper operation and long service.FEATURES1.3M pixel USB Camera designed for easy use on a microscope.Simply connect to USB port for video image display.Powered by USB port; No separate power supply required.NOTESThis is a precision instrument – Handle With Care. Use caution to avoidshock or excessive forces on instrument when in use or transport.Do not use or store in direct sunlight or areas with high temperatures orhigh levels of dust. Keep in location where temperature and humidity arestable.Keep lens surface clean from dirt and fingerprints. To clean the lens,wipe gently with lens cleaning cloth or soft cotton cloth.When not in use, store in supplied case in location which has lowmoisture in order to prevent corrosion or internal mold growth.USB CAMERA FOR MICROSCOPEMU-130The preview screen image can be frozen and saved as an image file byclicking on the image capture icon on the toolbar.Image displayed on the Preview Screen can be captured and saved as video.Start videocapture.Display image is dark or blurry.I nsure there is sufficient lighting using microscope lamp or accessory light.Driver software does not install. Viewer software does not work properly.Please confirm PC operating system is compatible; contact distributor.Shortcut does not appear on the desktop.Shortcut will only be created for user with administrator privileges.If you want to create a shortcut for user without administrator privileges, go to theapplication installation directory to create the shortcut.Note) For default installation, the application is installed in the followingdirectories: C: Program Files ScopeImage ScopImage 9.0C: Program Files (x86) ScopeImage ScopImage 9.0Still Image Capture and SaveTROUBLESHOOTINGUNINSTALL PROCEDUREImage PreviewDouble click on ScopeImage9 icon to start the application.Select the device labeled "Camera-X1N"Using the preview screen, follow the microscope instructions foradjusting focus of the object being viewed.In the Windows Control Panel, Select "Uninstall a program" and thenselect ScopImage9.0 and uninstall.Image Preview OperationThe function toolbar can be used to manipulate the image displayed on thepreview screen.Location and filetype can bespecified in theCamera control →Capture → Capturepreferences menuImage format can be specified in the Cameracontrol → Image Source menu.Select the image format based on yourrequirements:MJPG Select when high frame rate isdesired.YUY2 Select for high image quality.Open preview screen. When icon is notlit, preview can not be opened.Save the displayed preview as a stillimage.Pause the preview screen display.Play or resume the preview screen.Freeze the image displayed on thepreview screen.To save image, click on:File menu → SaveClicking on thein the imagetab closes the image.Open the destination folder.Save a video of the image.Display pixels in without scaling forhighest details when adjusting focus.Display full field of view for adjusting sizeof image shown on preview screen.Flip the preview display alongvertical axis (right and left.)Flip the preview display alonghorizontal axis (up and down.)Full screen display on monitor (clickon “Close Full Screen” button toclose.1 Depending on PC settings, these features may not beoperable.Will vary for different PC settingsVideo Capture and SaveUSING THE VIEWER SOFTWARE (ScopeImage 9.0)Feature SupportViewer Software (ScopeImage 9.0) provides supports for the followingfeatures:Image preview display Preview screen control toolbarStill image capture and save Video capture and saveOther features are not covered. Please note, support for additionalfeatures can not be provided even if requested.Stop videocapture.Pause video capture.1:11:1Pause video capture.Resume video capture.MEMONiigata seiki Co., Ltd.5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055Tel. : +81-256-33-5522 Fax. : +81-256-33-5518MAIL intl.sales@niigataseiki.co.jpURL http://www.niigataseiki.co.jpDouble click on the file "SISetupX1N.exe" in the CD-ROM folder.When the language selection screen appears,select “English” and click “OK”Remove CapsConn.Blue Light OnPower is on(from PC USB)Red Light FlashingImage beingsent to PCPreview ScreenUSING THE VIEWER SOFTWARE (ScopeImage 9.0) - continuedINSTALLING SOFTWARE |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine