NikonTechnical NoteHow to Extract USBSCAN.SYS from yourWindows 98/98SE/98oem Installer CDApplies to:Coolpix 990/880-Windows 98/98Second EditionOur support staff indicates that a number of users fail to install the USBSCAN.SYS which is a Windows Support File for USB products. Thisfile is contained in all versions of the Windows 98 installer CD.At times the hardware install wizard does not indicate the correct location of this file and after a number of attempts to install this file hasfailed, you may assume it is not required.The USBSCAN.SYS file for the correct operation of NikonView3.is requiredHere is a step by step method for obtaining the USBSCAN.SYS file from your Windows Installer CD. Please note that on some systems, yourvendor may provide a Windows Installer CD. If this is the case, you can sometimes find the Windows Installer located within yourWindows system directory in a folder called "Options".If you do not have either a Windows 98/98SE installer CD or the Options folder, please contact your system supplier for assistance.notIf you do not have a Windows Installer CD, check your system for an Options folder. When the source directory is requested, browse to theOptions folder to proceed.In order to begin, please place your Windows installer CD in your CD ROM drive.From the Menu SelectStart Run....In the Run Dialog type:MSINFO32This will present the Microsoft System Information application with the dialog shown below ( Figure 1)