Ningbo SK-5801 User Manualr
  |
SK-5801Remote Controlled RF SocketUSER GUIDERSet-upInsert the battery into the battery compartment of the remote control making sure polarityis correct.For first usePlug the socket into a main or wall socket,the LED will flash once per second (underlearning code situation).Point the remote at the socket and hold down one of buttons ofON or OFF on the remote(1,2,3or4) until the LED flashes continuously in 2 seconds.Andthen the LED flashes once per second,that means the code was successfully learned bysocket,the socket has memorized the code.Then press ON or OFF button which ischose,the socket works.For advanced useUnder off situation,press ON/OFF switch on the socket last for 3 seconds or hold down theOFF button on the remote of which channel has learned code continuously for 3seconds.Then the LED flashes once per seconds,that means the socket turns intolearning situation.In this moment,it can learn another remote code.ATTENTION: All RF receivers(socket,switch,connecting box,lamp holder) can becontrolled by more than one remote.Under learning code situation,the receiver canlearn more than one remote’s codes.Adapted Transmitter: T-03,T-05,T-06To operatePlug a lamp(or other electric device)into the socket and switch on the lamp.Then for on oroff press the correct ON or OFF button just once.Trouble shootingIf remote control will not operate RF socket-1. The battery power may be low and the battery may be replacing.2. The remote is too far away from the socket-move closer and try again.3. The code is not learned successfully.Clearing codesIn off situation, hold down the OFF button on the remote of which channel has learnedcode continuously for 3 seconds.Then the LED flashes once per second(under learningcode situation),and hold down ALL OFF button continuously for 3 seconds.When the LEDflashes from quickly to once per second,that means clearing code is successful.Alternatively- |
Related manuals for Ningbo SK-5801
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine