WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.TOTAL CRUSHING® PITCHERSINGLE-SERVE CUPNINJA® INTELLI-SENSE™ BLENDER DUO®QUICK ASSEMBLYPlease make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit.CT640 SERIESConnect the base to power source. Press the Power symbol. After the unit is turned on,display will read “- --” until the cup is correctly connected to the base.QUESTIONS? We’re here to help. Call 1-877-646-5288 or visit ninjakitchen.comOnce a container is locked onto base, the program buttons compatible with that container will illuminate.FROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTOConnect the base to power source. Press the Power symbol. After the unit is turned on,display will read “- --” until the pitcher is correctly connected to the base.1.Place the TotalCrushing Pitcheron base and turnclockwise to lockin place.2.Holding StackedBlade Assembly bythe top of the shaft,insert it into pitcher.3.Align arrows onPitcher Lid andhandle, then lowerhandle to lockin place.WARNING: Stacked Blade Assembly is sharp and not locked in place. Make sure lid is locked onto pitcherbefore pouring contents. If pouring without lid, carefully remove Stacked Blade Assembly first. Failure todo so will result in a risk of laceration. Refer to the Ninja Owner’s Guide for additional information.Once a container is locked onto base, the program buttons compatible with that container will illuminate.FROZEN DRINKSSMOOTHIESPUREEPULSEHIGHMEDLOW /DOUGHAUTOAUTOAUTO1.Fill Single-Serve Cupwith desired contents.2.Screw on Pro ExtractorBlades Assemblyclockwise until youhave a tight seal.2.Flip cupupside downand lowerit onto base.3.Turn cupclockwise tolock in place.