Nisis Quickpix Qp2 Installation Manual
NISIS Qp2 Digital Camera Installation Guide Rev 1.9Setting up your NISIS QUICKPIX Qp2 Digital CameraWelcomeThank you and congratulations on your purchase of the NISIS Qp2 Digital Camera.IntroductionThe NISIS Qp2 is a 3 in 1 Digital Camera, providing Digital still pictures, video movies and live Web Campictures.Package ContentsPlease check that your NISIS Qp2 Digital Camera package contains the following items. If you find any partsmissing, please contact your supplier immediately.1. NISIS Qp2 Digital Camera2. USB Cable3. Stand Base4. Stand Camera holder5. Installation CD and Application CD6. 2 type AAA 1.5 Volt batteries7. Carrying strap8. Installation Guide (this document)Minimum System RequirementsPentium 200MHz. Processor or faster32MB of RAM memory (64MB recommended)Graphics adapter with at least 2MB RAM and capable of displaying at least 16-bit high colourInstalled USB port1Windows 98, ME or 2000 operating system2CD ROM Drive1 It is recommended that you check to ensure that your USB ports have been installed, before you commence theinstallation by following these instructions :-1. Select Start>Settings>Control Panel>System>Device Manager if you have Windows 98 or ME, orStart>Settings>Control Panel>System>Hardware>Device Manager if you have Windows 2000.2. In the list of Devices shown in the Device Manager, there should be a line that reads Universal SerialBus controllers.3. Double click on this line. At least two devices should be listed.4. One line should end with “………….PCI to USB Universal Host Controller” and the other lineshould read “USB Root Hub”5. If either or both of these two lines have a yellow explanation mark “!” or a red cross next to them,this indicates your USB controller has a problem. You MUST correct these problems before youattempt to install the Qp2 camera, otherwise the installation will fail.2 Windows 95 OSR2 has partial USB support, but because it does not support USB fully, it is possible that USBdevices do not work reliably. NISIS has therefore decided to recommend that non of its USB products areinstalled under Windows 95. NISIS does not support any of its USB products under Windows 95.Checking for the latest Manuals and Software DriversNISIS continuously strives to improve its products and services, so manuals and software drivers are updatedfrequently. Before you start the installation of this product, we strongly recommend you visit the NISIS web siteat nisis.com to ensure you use the latest manual and the latest software drivers for this product.You will find the latest drivers and manuals under the Drivers & Manuals section on the web site. All newmanuals have a Revision No. so you can compare the Rev. No. of your manual with the latest Revision on theweb site.Similarly, Drivers have Version Numbers so you can check to see whether you already have the latest DriversVersion. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine