Nissei SA-2140 Quick Start Manual
  |
Frequency Rage : 400 MHz to 1500 MHzInput and Output Connector : 75 ohms F-type femaleCurrent Passing : AC/DC 1A Max, All PortsVoltage Passing : 25 V MaxPlace to Use : Indoors OnlyVSWR : 2.0 or Less1. Features2. SpecificationsItem 2-Way Splitter 4-way Splitter 6-Way SplitterModel SA-2140 SA-4140 SA-6140400MHz Band Splitting Loss 4.2 dB or Less 8 dB or Less 10.5 dB or Less600MHz Band Splitting Loss 4.2 dB or Less 8 dB or Less 10.5 dB or Less1.4GHz Band Splitting Loss 4.8 dB or Less 9.5 dB or Less 12 dB or Less400MHz Min. Isolation 20 dB or Over 20 dB or Over 18 dB or Over600MHz Min. Isolation 20 dB or Over 20 dB or Over 18 dB or Over1.4GHz Min. Isolation 15 dB or Over 15 dB or Over 15 dB or OverDimensions (inches) 2.2 x 2.1 x 0.6 3.0 x 2.1 x 0.6 4.8 x 2.1 x 0.6Weight (lbs.) 0.12 0.15 0.24Common Specifications(Note) All specifications are subject to change without notice.Caution This splitter passes current through all the terminals. Please be aware that if you use it for TV antennasystem, CATV antenna system, etc., the connected equipment may be damaged. Because it is for indoor use only, please do not use outdoors where it is exposed to water. For good long-term connection, it is recommended to use contact pin type F type connector for RG11type coaxial cable.2, 4, 6 Way Splitters for WMTS AntennaModel SA-2140, SA-4140, SA-6140 The power supplied through the core of the coaxial cable to which it is connected passes through all theterminals, so you can operate a line amplifier that functions on the power supply via the coaxial cable. The case is made of die-cast metal with a high shielding effect, so it has a high electromagnetic shieldingeffect. |
manualsdatabase
Your AI-powered manual search engine