Nissei go Series Installation Manual
  |
● Use the wall bracket C-WG-S/C-WG/C-WG-L for split type airconditioner that weight less than 80kgs or 176lbs.●After installing, please review the contents of the providedWarning.●If disassembling or disposing of the bracket, please consult withSpecialist or the sellerHow to assemble(Back side for use as a two-tiered installation）自然保護のため、この説明書はリサイクルペーパーを使用しています。04-15HIGH FLAT and DOUBLE MOUTHING typeseries Universal Condenser Bracket INSTALLATION MANUALNISSEI METALS CO.LTD.RC 2pcsL 2set18pcsONTETS!NWARNING2.Raise up the ② Leg Connector set on the ① Frame Connector and fixit with the ⑧ Hex Bolts(+ M8-20)※Please note that there are (R) and (L) Leg Connectors.2pcs3.Reffering to the dimension scaleOn the ① Frame Connector, hookthe ③ Base on the opposite sideof frame and then fix the front sideof ③ Base with ④ Metal Fitting for base.①Frame Connector③Base④Metal Fitting forBaseDimension scaleFor a two-tieredinstallation, use thefour longholes below.※If Hex bolts aretightened toomuch ,the threadmay break(Tightening torque12N-m)①Frame Connector②Leg ConnectorIf the ③ Base is shifting, lightly hit the ④ Metal Fitting forBase gently with such a hammer in the direction of depth⑧Hex BoltsThe mounting holes for ② Leg Connector will change dependingon the height of the air conditioner installed in the lowersection.Effective dimensionof lower sectionAir conditioner Foot Dimensions (mm and inch)When attaching with commerciallyavailable anchor bolts, fix withthe dimensions shown in thefigure below.Bend it if it is longFix the upper left and right sides of the pillars from thecolumns on the wall with ⑥ Retaining Stay, ⑦ Coach Bolt,⑧ Hex Bolt, and ⑨ Nuts.Pillar※⑦Coach bolts shouldbe fastened to pillarsor other solidstructures.Install A/C Outdoor unit1. Tighten each bolts ofthe bracket firmlyagain2. Set ⑤ insulation nut,install and fix A/Coutdoor unit with ⑧Hex bolts.③ Base⑤InsulationnutsAnchor DimensionInch(mm)For installationHow to assemble（Back side for use over existing air conditioner）Extend the ① Frame Connector to form a frameNever sit or swing on the item, as it may breakThis instruction manual uses recycled paper for protection of the natural environment. 04-15Do not remodel. The items lifespan will shorten if the strength isinsufficientTighten the screws securely. Failure to tighten the screws may result indisassemblyNever sit or swing on the item, as it may breakNever sit or swing on the item, as it may break● If there is a point to notice with this products, please inform us the product number printed on the side of carton boxC-WG-S・C-WG・C-WG-L |
manualsdatabase
Your AI-powered manual search engine