Nite Devil CAM950 User Manual
          |
www.nitedevil.com Doc XCAM950NiteDevil Hi-Res Covert Camera ModulesEmail: support@nitedevil.com Last Revised: 11/08/2010All 3 cameras provide a resolution of 600TVL in colour and 700TVL in b/w. These cameras comewith many of the NiteDevil features including an OSD menu, the SENS-UP feature allowing minimumillumination down to an incredible 0.00019 Lux and a WDR option. The cameras run on a 12V DCsupply and only draw 90mA allowing it to be used effectively in covert systems.The dome requires a 12v DC regulated power supply providing a minimum of 120mA. When connecting to 12v DC powersupply, always use a regulated supply. The camera has a 2.1 power jack plug.Powering the CameraConnect a BNC cable to the BNC connector on the camera and connect cable to monitor or DVR as required. You will needa female to female BNC connector when connecting to a DVRConnecting VideoDo not install the camera in extreme temperature conditions. Only use the camera where temperatures are between –20degrees centigrade and +50 degrees centigrade.PrecautionsNever install the camera in damp or humid conditions. This can affect image quality.This camera requires stable lighting conditions to operate effectively.Do not touch the front lens of the camera. Fingerprints can stain the lens glass.The camera must not be placed directly facing the sun or strong light. This may damage the camera CCD.Never expose the camera to rain or liquids. These will corrode the camera electronics.Do not subject the camera to vibration as it may cause camera malfunctions.Only use this camera internally.Features 1/3” Sony Super HAD CCD 600/700 TVL Low Light 0.00019Lux Wide Dynamic Range setting 12V DC 90mA power consumption 3 Lens Options SENS-UP auto function 2x – 256x Built-in OSD menu Built-in 3DNR function Miniature covert camera Auto BLC function Free mounting bracket Electronic ShutterCAM955NiteDevil CAM950/955/960 Covert ModulesThis NiteDevil Camera is a miniature covert camerameasuring only 36.5mm wide x 36.5mm high andincludes a free fixing bracket.Available in three lens options.CAM950 - 3.6mm board lens,CAM955 - 3.7mm flat pinhole lensCAM960 - 3.7mm cone pinhole lens.CAM960CAM950 |
Related manuals for Nite Devil CAM950
manualsdatabase
Your AI-powered manual search engine