Nitecore CG7 User Manual
  |
CG7 User ManualFeatures• Designed with the combination of the green and white beams• The white beam utilizes 4 x CREE XP-G3 S3 LEDs for a max output of 2,500 lumens• The green beam utilizes 4 x CREE XPE LEDs to provide a max output of 550 lumens• High efficiency constant circuit provides a stable output up to 130 hours• Dual tail switches specially designed for tactical applications control 5 brightness levels of the white beam, 3 levels of the greenbeam and STROBE Mode• STROBE READYTM Technology to enable a quick access to STROBE Mode (Patent No.: ZL201320545349.4)• STROBE Mode uses randomly changing frequencies for stronger dizzying effects• Tactical Mode and Daily Mode available for the white beam• The power indicator on the tail cap indicates the remaining battery power• The power indicator can also display the battery voltage (±0.1V)• Rigid double layer tube design• Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)• Electronic reverse polarity protection• Optical lenses with double-sided scratch resistant coating• Constructed from aero grade aluminum alloy• HA III military grade hard-anodized finish• Rating in accordance with IP68 (2 meters submersible)• Impact resistant to 1 meterDimensionsLength: 148.2mm (5.83”)Head Diameter: 40mm (1.57”)Tail Diameter: 26mm (1.02”)Weight: 158g (5.57oz)AccessoriesHolster, Clip, Lanyard, Spare O-ringBattery OptionsType Nominal Voltage CompatibilityNITECORE NL1835HP (3500mAh) 18650 3.6V Y (Recommended)IMR 18650 High-Drain Rechargeable Li-ion Battery IMR 18650 3.6V/3.7V Y (Recommended)18650 Rechargeable Li-ion Battery (Output over 8A) 18650 3.6V/3.7V Y (Compatible)Primary Lithium Battery CR123 3V Y (Compatible)Rechargeable Li-ion Battery RCR123 3.6V/3.7V Y (Compatible)18650 Rechargeable Li-ion Battery (Output below 8A) 18650 3.6V/3.7V N (Incompatible)Technical DataFL1STANDARDWhite Beam Green BeamTURBO HIGH MID LOW ULTRALOW STROBE HIGH MID LOW2,500Lumens 1,100Lumens 320Lumens 90Lumens 8Lumens 2,500Lumens 550Lumens 260Lumens100Lumens*30min 1h 45min 4h 15min 20h 130h ─ ─ ─ ─279m 190m 102m 54m 14m ─ 280m 150m 100m19,500cd 9,000cd 2,600cd 740cd 51cd ─ 20,300cd 6,170cd 2,690cd1m (Impact Resistance)IP68, 2m (Waterproof and Submersible)Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/NEMA FL1, using 1 x18650 Li-ion battery (3,500mAh) under laboratory conditions. The data may vary in real world use due to different battery usage orenvironmental conditions.* The runtime for TURBO mode is tested without the temperature regulation.* TURBO Availability: The TURBO level is only accessible when using an 18650 rechargeable Li-ion battery with an output over 8A oran IMR 18650 high-drain rechargeable Li-ion battery. It is inaccessible when using CR123/RCR123 batteries.Battery Installation / RemovalAs illustrated, after unscrewing the battery cap, insert / remove the battery(s)and screw to tighten the battery cap.Note: After the battery insertion, the power indicator beside the tailswitches will flash to indicate the battery voltage. Please refer to the “PowerIndication” section of this manual for more details.Warnings:1. Ensure the battery(s) is/are inserted with the positive end towardsthe head. The product will not work if the battery(s) is/are incorrectlyinserted.2. CAUTION! Possible dangerous radiation! Don't look into the light! May bedangerous for your eyes.3. When the power level is low, please stop using the product and replace orrecharge the battery to prevent damage to the battery.4. When the product is kept in a backpack or left unused for prolonged time,please remove all batteries to prevent accidental activation or batteryleakage.5. DO NOT submerge the light into any liquid when it is hot. Doing so maycause irreparable damage to the light due to the difference of air pressureinside and outside of the tube.Beam SwitchingThe CG7 has an easy switching mechanism between the green and white beams. Pushthe head outwards and rotate the head clockwise or counterclockwise as illustrated toswitch between the green and white beams.Tactical Momentary IlluminationHalf press and hold the Power Button to turn on the light momentarily. Release to turn itoff.Note: The CG7 has mode memory. When reactivated, the flashlight will automaticallyaccess the previous memorized level or mode.Power ButtonPower IndicatorMode ButtonSYSMAX Innovations Co., Ltd.TEL: +86-20-83862000 FAX: +86-20-83882723E-mail: info@nitecore.com Web: www.nitecore.comAddress： 24/F, TCL Plaza, No. 18 Haizhou Road, Haizhu District, Guangzhou, 510335,Please find us on facebook : NITECORE FlashlightThanks for purchasing NITECORE!Operating Instructions of the Green BeamThe following instructions are only applicable when the green beam is selected.On / OffOn: When the green beam is off, press the Power Button until a click sound is heard to access the memorized level of the green beam.Off: When the green beam is on, press the Power Button until a click sound is heard to turn it off.Output LevelsWhen the green beam is on, short press the Mode Button to cycle through the following green output levels: LOW – MID – HIGH.Momentary Access to HIGHWhen the green beam is on, press and hold the Mode Button to access the HIGH level of the green beam. Release to return to theprevious memorized green output level.Operating Instructions of the White BeamThe following instructions are only applicable when the white beam is selected.On / OffOn: When the white beam is off, press the Power Button until a click sound is heard to access the memorized level of the white beam.Off: When the white beam is on, press the Power Button until a click sound is heard to turn it off.User Mode Selection of the White BeamThe CG7 provides 2 user modes of the white beam for different users and situations.Daily Mode: When the light is on, press and hold the Mode Button to momentarily access the TURBO level of the white beam. Releaseto return to the previous memorized brightness level of the white beam. (Default Setting)Tactical Mode: When the light is on, long press the Mode Button to directly access STROBE Mode. Short press the Mode Button againto return to the previous memorized brightness level of the white beam.To select a desired user mode:1. Ensure the light is turned off.2. Loosen the tail cap.3. Keep holding the Mode Button on the tail cap while simultaneously tightening the tail cap.4. Once the tail cap has been tightened, the LEDs will indicate a user mode selected by flashing once for Daily Mode and flashing twicefor Tactical Mode.Brightness LevelsWhen the white beam is on, short press the Mode Button to cycle through the following brightness levels of the white beam:ULTRALOW – LOW – MID – HIGH – TURBO.STROBE READYTMWhen the white beam is off in either user mode, press and hold the Mode Button to momentarily access STROBE Mode. Release to turn it off.Power IndicationWhen the battery is inserted, the power indicator will flash to show the battery voltage (±0.1V). For example, when the battery voltageis at 4.2V, the power indicator will flash 4 times followed by a 1.5-second pause and 2 more flashes. Different voltages represent thecorresponding remaining battery power levels:1×18650 battery2×CR123 batteriesNote: When using two CR123/RCR123 in series, the indicator will show the average voltage between the two batteries.ATR (Advanced Temperature Regulation)The integrated ATR technology regulates the output of the CG7 according to the working condition and ambient environment tomaintain the optimal performance.Changing BatteriesThe batteries should be replaced when the output appears to be dim or the flashlight becomes unresponsive due to low power.MaintenanceEvery 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.Warranty ServiceAll NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a localdistributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free ofcharge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor andmaintenance, but not the cost of accessories or replacement parts.The warranty will be nullified if:1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;2. the product(s) is/are damaged due to improper use; (e.g. reversed polarity installation)3. the product(s) is/are damaged due to battery leakage.For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email toservice@nitecore.com※ All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occurbetween this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpretand amend the content of this document at any time without prior notice.Low power Full power3.5V 3.7V 3.9V 4.2VLow power Full power4.8V 5.6V 6.0V 6.4V |
Related manuals for Nitecore CG7
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine