Noctua NA-FC1 User Manual
  |
Dear customer,Thank you very much for choosing our NA-FC1. The NA-FC1 is a compact, highly flexiblecontroller for 4-pin PWM fans that can both work on its own for manual speed reduction andalso work in tandem with the automatic motherboard fan control. Each Noctua product isdouble-checked for flawless operation by our quality control team before it leaves the factoryand I’m confident that you will be able to sense some of the research, attention and care we’veput into making this device.Enjoy your NA-FC1!Yours sincerely,Roland Mossig, Noctua CEOThis manual explains how to use the NA-FC1 fan controller. Should you encounter any difficul-ties, please check the FAQs on our website (www.noctua.at/faqs) and don’t hesitate to contact oursupport team at support@noctua.at.Noctua cannot be held responsible for any damage or losses caused by compatibility issues.Multilingual versions of this manual are available on our website: www.noctua.at/manuals.Noctua NA-FC1 | User manualOverview of the device and accessoriesSpeed setting status LEDInput connector“No stop” mode status LEDSpeed control dial“No stop” mode push buttonOutput connectorSetupSpeed control dial: Sets PWM duty cycle between 0 and 100% in manual mode or adjustsinput signal from 100 to 0% in motherboard control mode (see modes of use).Speed setting status LED (orange): Changes in brightness according to the setting of the speedcontrol dial (max. brightness = max. speed, min. brightness = min. speed).“No stop” mode push button: Press to enable/disable “no stop” mode (see “no stop” mode).“No stop” mode status LED (green): On in “no stop” mode, off in normal mode.Input connector: Connected to the motherboard or other power source using the supplied NA-EC1 cable.Output connector: Connected to the fan or multiple fans if splitter cables are used.NA-EC1 input cable: Connects the device to the motherboard or other power source.NA-AC4 input cable with power supply adaptor: Connects the device to the power supply(S-ATA connector) and the motherboard (obtaining PWM input from the motherboard andforwarding RPM speed information to the motherboard).8NA-SC1 3-way splitter cable: Connects up to three fans to the output connector.MotherboardFan(s)MotherboardFan(s)Power supply |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine