1. Insert the SIM and memorycard1. With the phone facing down, put your fingernailin the USB connector, bend the back cover open,and remove it.2. Slide the SIM card holder to the left and open itup. Put a nano-SIM card in the SIM slot with thecontact area face down. Close down the holder andslide it to the right to lock it in place.3. If you have a dual-SIM phone, slide the SIM cardholder of the SIM2 slot to the right and open it up.Put your second nano-SIM card in the slot with thecontact area face down. Close down the holder andslide it to the left to lock it in place.4. If you have a microSD memory card, slide thecard in the memory card slot.5. Press the top edge of the back cover against thetop edge of your phone, and then snap the coverinto place, locking all the hooks around the edges ofthe cover.Warning! Do not open the battery cover, it mayharm your device.Note: Switch the device off and disconnect thecharger and any other device before removing anycovers. Avoid touching electronic components whilechanging any covers. Always store and use thedevice with any covers attached.Use only original nano-SIM cards. Use of incompati-ble SIM cards may damage the card or the device,and may corrupt data stored on the card.Use only compatible memory cards approved foruse with this device. Incompatible cards may dam-age the card and the device and corrupt data storedon the card.Important: Do not remove the memory cardwhen an app is using it. Doing so may damage thememory card and the device and corrupt datastored on the card.Both SIM cards are available at the same time whenthe device is not being used, but while one SIM cardis active, for example, making a call, the other maybe unavailable.2. Charge the battery and switchthe phone onPlug a compatible charger into a wall outlet, andconnect the cable to your phone. Your phonesupports the USB micro-B cable. You can alsocharge your phone from a computer with a USBcable, but it may take a longer time.If the battery is completely discharged, it may takeseveral minutes before the charging indicator isdisplayed.To switch your phone on, press and hold the powerkey until the phone vibrates. The phone guides youthrough the setup.For an online user guide and troubleshooting help,go to www.nokia.com/mobile-support.Get StartedNokia 2.1TA-1084/TA-1093 EN-US-CAHeadset connectorMicrophoneCameraFlash Front cameraProximity sensorEarpiece/LoudspeakerVolume keysPower/Lock keyUSB connectorLoudspeaker