What's Included?Nokia FastMile 5G Gateway - QuickStart GuideSetting up your Nokia FastMile 5G Gateway is quick and easy!Note: Make sure your device is Powered Off before starting the set-up process.Nokia FastMile 5G gateway Power Cable/AdaptorWatch onHow to Setup Rogers 5G Home Inter…Watch laterShareStep 1: Download the Nokia WiFi AppIf it’s your first time setting up your FastMile 5G Gateway, download the Nokia WiFi App to yourphone or tablet and sign in using your MyRogers credentials.Step 2: Insert the SIM cardMake sure the device ISN'T powered on when inserting the SIM card. If the device is powered on,remove the plug before proceeding.Check if the SIM card was pre-installed by your service provider. If not, follow these steps to insertyour SIM.Flip device over.Remove SIM tray from bottom of device.Place SIM securely in tray.Reinsert tray back into device.Disclaimer: Wireless Business Internet SIM name only appears in English at launchStep 3: Scan QR codeUsing the Nokia WiFi App, scan the QR code on the bottom of your device.Step 4: Power onPlug in your Nokia FastMile 5G Gateway and push the ON/OFF button.LED lights will appear on top of your device once it's powered on.Wait 30–60 seconds so the Gateway can search for a 5G signal.Step 5: Check light status for connectivityUse the Nokia WiFi App to check signal strength. You can also check signal strength by viewing theLED lights on top of your device.All three (3) LED lights means there's a very good signal strengthTwo (2) LEDs means good signal strengthOne (1) LED means weak signal strengthTo improve your signal strength, you can do the following:Move the location of your device (higher is always recommended).Move your device close to a window or outer wall with few obstructions.Note: Press the TEST button on the side of your Gateway to check the signal strength at any time.Step 6: Connect to Wi-FiIt’s time to connect to your Wi-Fi network!Use the default SSID and Wi-Fi key printed on the bottom of your Nokia FastMile 5G Gateway toconnect your devices.Step 7: Change Wi-Fi network name andpasswordUse the Nokia WiFi App to change your Wi-Fi name and password anytime!If you would like to change them now, follow these steps:Open the Nokia WiFi App.Tap the Home Network card on the home screen.Select the edit icon on the bottom to load the ’Change Wi-Fi’ screen.On the top right, click the pencil icon to change the Wi-Fi name and password of your network.After you've made your changes, tap the check mark to save your changes.Note: After changing your Wi-Fi name and password, you'll need to connect your devices using yournew Wi-Fi credentials.