Nokia TA-1108 User Manual
Also see for TA-1108: User guide
  |
1. Insert the SIM and memorycard1.Open the SIM and memory card tray: push thetray opener pin in the tray hole and slide the trayout.2. If you have a single-SIM phone, put a nano-SIMcard in slot 1 and a memory card in slot 2 on thetray with the contact areas face down. If you have adual-SIM phone, put a nano-SIM card in slot 1 andeither a second SIM or a memory card in slot 2 withthe contact areas face down.3. Slide the tray back in the slot.Use only original nano-SIM cards. Use of incompati-ble SIM cards may damage the card or the device,and may corrupt data stored on the card.Use only compatible memory cards approved foruse with this device. Incompatible cards may dam-age the card and the device and corrupt data storedon the card.Important: Do not remove the memory cardwhen an app is using it. Doing so may damage thememory card and the device and corrupt datastored on the card.Both SIM cards are available at the same time whenthe device is not being used, but while one SIM cardis active, for example, making a call, the other maybe unavailable.2. Charge the battery and switchthe phone onPlug a compatible charger into a wall outlet, andconnect the cable to your phone. Your phonesupports the USB-C cable. You can also charge yourphone from a computer with a USB cable, but it maytake a longer time.If the battery is completely discharged, it may takeseveral minutes before the charging indicator isdisplayed.To switch your phone on, press and hold the powerkey until the phone vibrates. The phone guides youthrough the setup.For an online user guide and troubleshooting help,go to www.nokia.com/mobile-support.USB-C USB micro-BGet StartedNokia xxTA-1108 ENHeadset connectorMicrophoneMain cameraFlashFingerprintsensorMicrophoneLoudspeakerUSB connectorPower/Lock keyVolume keysSIM and memorycard slotFront cameraProximity sensorEarpiece |
Related manuals for Nokia TA-1108
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine