Nomadix AG 2300 Quick Start Manual
Also see for AG 2300: User guideUser guideUser guideUser guide
         |
AG 2300, AG 3100, AG 5600 and Metro Bundle Quick StartP/N 200-1021-001-M | 1 |Copyright © 2011 Nomadix, Inc.This quick start document provides instructions and reference material for getting started with theNomadix Access Gateway products, specifically the AG 2300, AG 3100, AG 5600 and AG 5600Metro Bundle. If you have any problems, please contact our technical support team at+1.818.575.2590, or email: support@nomadix.com.Accessory Box ContentsAG 2300, AG 31001 – NSE Accessory CD1 – U.S. (NEMA 5-15p) Power Cord1 – EU (Schuko CEE7/7) Power Cord1 - 6’ Serial Null Modem Cable2 - Rack Mount Brackets1 – Bumper and Screw KitAG 5600, AG 5600 Metro Bundle1 - NSE Accessory CD1 – U.S. (NEMA 5-15p) Power Cord1 - EU (Schuko CEE7/7) Power Cord1 - 6’ RJ45 – DB9 Console Cable2 - Rack Mount Brackets1 – Bumper and Screw KitStart Here1. Unpack the Nomadix Access Gateway and place the product on a flat and stable worksurface.2. Register the gateway for support services by completing and returning the NomadixGateway Registration Form - hardcopy enclosed or obtain the form online athttp://www.nomadix.com/registration.3. Connect the power cord.4. There are two ways to connect to the Access Gateway:a. Serial Connection:i. For AG 5600 and Metro, connect the RJ45 console cable (6ft. length) tothe product’s console port and the DB9 female to the computer. For AG2300 and AG 3100, connect the DB9 female-to-female (NULL) serialcable (6ft. length) between the product’s serial interface and yourcomputer.ii. Start a HyperTerminal session to communicate with the AG via theproduct’s serial interface. Use the following configuration settings foryour session:Bits per Second Data Bits Parity Stop Bits Flow Control9600 8 None 1 None |
manualsdatabase
Your AI-powered manual search engine