Norma Face Shield Instructions Manual
  |
NORMA Face ShieldInformation from manufacturer NORMA Distribution Center GmbHAs per PPE Regulation (EU) 2016/425Version: 28.05.2020Manufacturer: NORMA Distribution Center GmbH, Unterm Ohmberg 24, 34431 Marsberg, GermanyInstructions for1. Storage: Store the NORMA Face Shield at room temperature in a dry, closed space.2. Use: Before placing the NORMA visor on the NORMA frame, make sure to remove the protective film,which is applied to both sides of the shield. The protective film is coloured green on one side and is clearon the other. Tip: A piece of tape helps to remove the protective film. Simply apply it to the edge of thefilm so that the piece of tape sticks out a bit. Then, pull it off. The visor is clipped to the band by placingthe holes onto the pins. The top rear ends of the visor are inserted into the small side bands. The visordoes not have to be adjusted to the user.We recommend using the product described above once. However, if cleaned and disinfected properly,the product can also be used multiple times. As a precaution, we would like to point out that thisrecommendation is non-binding, non-validated and non-certified. The user is responsible for verifyingwhich processes and measures are suitable and necessary for cleaning and disinfecting the product forrepeat use in order to meet or achieve the properties required for the intended use of the product. Thisapplies in particular when our products are processed, combined or used otherwise.3. Cleaning and disinfection: The visor can be cleaned using a microfibre cloth. It can be disinfectedusing customary agents.4. Maintenance and inspection: Inspect the PPE before use. We recommend replacing defective PPE(e.g. scratched visor). |
Related manuals for Norma Face Shield
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine