Version 3.0Part No. 311120-B Rev 00November 2000600 Technology Park DriveBillerica, MA 01821-4130Getting Started with theContivity 2600

Nortel Contivity 2600 Getting Started

restricted rights legend

canadian department of communications radio interference regulations

Preface

Related publications

Acronyms

Hard-copy technical manuals

Chapter 1 Contivity 4600 Option Installation

Figure 1 Removing the Contivity 4600 front bezel

Figure 2 Contivity 4600 front components

Contivity 4600 system board layout

Installing Contivity 4600 LAN/WAN and hardware accelerator cards

Installing Contivity 4600 DIMMs

Replacing a Contivity 4600 power supply

Figure 6 Removing a Contivity 4600 power supply

Replacing a Contivity 4600 hard disk drive

Figure 7 Removing a Contivity 4600 hard disk drive

Chapter 2 Contivity 4500 Option Installation

Figure 8 Removing the Contivity 4500 front bezel

Figure 9 Contivity 4500 front components

Contivity 4500 system board layout

Figure 10 Sample Contivity 4500 system board

Installing Contivity 4500 LAN/WAN and hardware accelerator option cards

Figure 11 Installing 4500 LAN/WAN and hardware accelerator option cards

Installing Contivity 4500 DIMMs

Replacing a Contivity 4500 power supply

Replacing a Contivity 4500 hard disk drive

Figure 14 Removing a Contivity 4500 hard disk drive

Chapter 3 Contivity 2500/2000/4000 Option Installation

Figure 15 Removing the Contivity 2500/2000/4000 front bezel

Removing the Contivity 2500/2000/4000 top cover

Contivity 2500/2000/4000 system board layout

Figure 18 Sample Contivity 4000 system board

Installing Contivity 2500/2000/4000 LAN/WAN option cards

Installing Contivity 2500/2000/4000 DIMMs

Replacing a Contivity 4000 power supply

Figure 21 Removing a Contivity 4000 power supply

Replacing a Contivity 4000 disk drive

Figure 22 Removing a Contivity 4000 hard disk drive

Figure 23 Installing Contivity 2500/2000/4000 DIMMs

Memory option

Chapter 4 Contivity 2600 Option Installation

Removing the Contivity 2600 front bezel

Removing the Contivity 2600 top cover

Contivity 2600 system board layout

Figure 26 The Contivity 2600 system board

Installing LAN/WAN and hardware accelerator option cards

Installing Contivity 2600 DIMMs

Chapter 5 Contivity 1600 Option Installation

Removing the Contivity 1600 front bezel

Removing the Contivity 1600 top cover

Figure 31 Removing the Contivity 1600 top cover

Contivity 1600 system board layout

Installing Contivity 1600 option cards

Figure 34 Installing Contivity 1600 LAN/WAN option cards

Figure 35 Installing Contivity 1600 option cards

Installing Contivity 1600 DIMMs

Chapter 6 Contivity 600 Option Installation

Opening the Contivity 600

Figure 37 Removing the bottom screws

Contivity 600 system board layout

Installing Contivity 600 option cards

Figure 40 Replacing the system into the chassis

Index

E Rev

2600

statement of conditions

New in this release

Finding the latest updates on the Nortel Web site

Getting help over the phone from a Nortel Solutions Center

Getting help through a Nortel distributor or reseller

Before you begin

Printed technical manuals

Nortel VPN Router 600 option installation

Shutting down the system to add or replace hardware

Figure 1 Removing the screws from the bottom of the VPN Router 600

Figure 2 Removing the chassis from the steel enclosure

Figure 3 Nortel VPN Router 600 system board

Installing or replacing an option card

Figure 4 Removing the blank bracket from the option card slot

Figure 5 Inserting the option card

Figure 6 Securing the option card in the slot

Replacing a DIMM

Figure 8 Installing a DIMM

Nortel VPN Router 1100 option installation

Installing or replacing option cards

Figure 9 Nortel VPN Router 1100 system board

Nortel VPN Router 1700 and 1600 option installation

Removing the front bezel and top cover

Figure 11 Removing the top cover

Figure 12 Location of option card slots and DIMMs on the system board

Attaching the antistatic wrist strap

Table 3 Supported option cards for the Nortel VPN Router 1600 and 1700

Table 4 Supported option cards for the Nortel VPN Router 1600

Figure 14 Removing an option card or a filler panel

Figure 15 Installing an option card

Installing or replacing DIMMs

Figure 17 Installing or removing a DIMM in a Nortel VPN Router 1700 or 1600

Nortel VPN Router 1740 option installation

Figure 18 Removing the front bezel

Figure 19 Removing the top cover

Figure 20 Location of option card and DIMM slots on the system board

Figure 21 Location of the grounding jack for the antistatic wrist strap

Table 5 Supported option cards for the Nortel VPN Router 1740

Installing the SSL VPN Module 1000 with other option cards

Figure 22 Installing or removing an option card

Figure 23 Replacing the front bezel

Figure 24 Installing or removing a DIMM

Nortel VPN Router 1750 option installation

Figure 25 Removing the front bezel

Figure 26 Removing the top cover

Figure 27 Location of option card and DIMM slots on the system board

Figure 28 Location of the grounding jack for the antistatic wrist strap

Table 6 Supported option cards for the Nortel VPN Router 1750

Figure 29 Installing or removing an option card

Figure 30 Replacing the front bezel

Figure 31 Installing or removing a DIMM

Nortel VPN Router 2700 and 2600 option installation

Figure 32 Removing the front bezel

Figure 33 Removing the top cover

Figure 34 Location of option card slots and DIMMs on the system board

Figure 35 Location of the grounding jack for the antistatic wrist strap

Table 7 Supported option cards for the Nortel VPN Router 2600 and 2700

Table 8 Installing other option cards with the SSL VPN Module 1000

Table 9 Supported option cards for the Nortel VPN Router 2600

Figure 36 Installing or removing an option card

Figure 37 Replacing the front bezel

Table 10 Base and maximum memory for the Nortel VPN Router 2600 and 2700

Figure 38 Installing or removing a DIMM

Nortel VPN Router 2750 option installation

Figure 39 Removing the front bezel

Figure 40 Removing the top cover

Figure 41 Location of option card and DIMM slots on the system board

Figure 42 Location of the grounding jack for the antistatic wrist strap

Table 11 Supported option cards for the Nortel VPN Router 2750

Table 12 Installing other option cards with the SSL VPN Module 1000

Figure 43 Installing or removing an option card

Figure 44 Replacing the front bezel

Figure 45 Installing or removing a DIMM

Nortel VPN Router 4600 option installation

Opening the VPN Router 4600

Figure 46 Removing the Nortel VPN Router 4600 front bezel

Figure 47 Nortel VPN Router 4600 front components

Nortel VPN Router 4600 system board layout

Table 13 Supported option cards for the Nortel VPN Router 4600