REFERENCE QTY. REMARKS ProjectLocationArchitectEngineerContractorSubmitted by DateBroan-NuTone LLC Hartford, Wisconsin www.nutone.com 800-558-1711Broan-NuTone Canada Missisauga, Ontario www.nutone.ca 877-896-1119Architectural & Engineering SpecificationsAugust 2012Humidity SensingRecessedFan / FluorescentLight21H 99044980BDESCRIPTIONTRIM RING BAFFLE:• Polymeric construction with matte white finish• Recessed styling, mounts flush with finished ceiling• Integrated humidity sensorLAMP:• Uses R30-shaped, 2700K, 16W, high efficacy, compactfluorescent lamp with GU24 base (included)BLOWER:• Plug-in, permanently lubricated, motor• Dynamically balanced centrifugal blower wheel for quiet,efficient performance• Quiet operationHOUSING:• Fits in 2” x 8” construction• Rugged, 26 gage, galvanized steel construction• 4” round, polymeric duct connector with 2” tapered sleeve andno metallic clatter• Adjustable mounting brackets span up to 24”CONTROLS: (purchase separately)• Model VS-96 - One rocker switch with “on” indicator light• Model VS-86SN - Two rocker switches - fits single outlet boxAUTOMATIC CONTROL:• Humidity control automatically turns fan ON when either ofthese conditions is detected:- a rapid to moderate (user adjustable) increase of humidity- humidity above user-adjustable set-point (50%-80% RH)• Two wire manual operation for odor control - Turns fan ONwhen power line through wall switch is cycled ON, OFF andback ON• Remains ON for a user-adjustable 5 to 60 minutes afterhumidity has stabilized and is below set-point or aftermanually initiated through power line cycling• Saves energy because unit runs only for the time required. Aunit controlled with a wall timer may keep fan ON longer thanrequired or turn it OFF before room is sufficiently ventilatedU.L. Listed for use in insulated ceilings (TYPE I.C.)U.L. Listed for use over bathtubs and showers when connected toa GFCI protected branch circuit.Title 24 compliant.ENERGY STAR qualified.MODEL 744SFLNT