Nxg NX-AW4 Quick Manual
  | |
Contents | 
Congratulations on the purchase of your new all-weather speakers. At NXG Technology,we strive to offer products that are durable, functional, and above all else – speakers thatproduce great audio. Like all NXG products, our all-weather speaker line has evolvedfrom hours of rigorous testing by our engineers and customers and were designed to pro-vide you with years of great sound, whether in your den, backyard or on your boat. Pleasetake a moment to to review the installation instructions to ensure that you get the mostfrom your new speakers.UnpackingCarefully remove your new NXG speakers from the box. Inspect the speakers for transitdamage. If you discover damage, contact your dealer immediately. Save your carton – it is thebest possible protection for your speakers should you ever have a need to move them.Positioning and Mounting Your New NXG SpeakersNote: the distance between yourself and the point directly between the speakers should be(roughly 20%) greater than the distance between the two speakers. Outside placement maybe different, due to variances in available mounting areas.1/4 – 20 threadedbrass inserts acceptuniversal stylemounting hardware(not included).Negative (Black)Input Binding PostCORRECT IN-PHASE HOOK-UPFIGURE 1FIGURE 2All NXG weather-resistant speakers are equipped withpowder-coated ratcheting aluminum mounting bracketsthat allow for vertical or horizontal mounting. Be certainthe type of anchor you choose, and the material youare mounting the anchor into, are capable of holdingthe weight of the speaker. (Many mounting anchor sys-tems are available from your local hardware store.)After mounting the bracket, connect the wire as shownin Figure 2, and loosely secure the speaker to thebracket using the supplied knobs. Adjust the speaker’sangle for optimum listening area coverage and firmlyhand-tighten the knobs.Hooking Up YourNew NXG SpeakersSTOP! – Make sure that you consult your amplifier’sowner’s manual regarding speaker hook-up. Your ampli-fier should be turned off throughout this procedure.Most speaker wire is polarity coded. This means thateach conductor is labeled either (+) positive or (-) neg-ative. The (+) positive side may be a different color ortexture than the (-) negative side. On the back of youramplifier, each channel should be labeled (+) and (-)as well as color coded red for (+) positive and black for(-) negative. NXG speaker terminals are color codedred for (+) positive and black for (-) negative. Be sureto hook (+) to (+), (red to red), and (-) to (-), (black toblack). (See figure 3.) All connections should be tight.Inspect connections for frays and stray strands of wiretouching both (+) and (-) terminals. (This will cause ashort and, perhaps, damage your equipment.)Positive (Red)Input Binding PostTo Negative Terminalof AmplifierTo Positive Terminal ofAmplifierSpeaker wire hole Powder-coatedaluminum ratchetingmounting bracketBACK VIEWBracket knobNX-AW4, NX-AW5, and NX-AW6All-Weather Speakers – Outdoor/Indoor/MarineStandard1/4 – 20 threadsHook up with either bare speaker wire aslarge as 10 gauge or NXG banana plugs. |
Related manuals for Nxg NX-AW4
manualsdatabase
Your AI-powered manual search engine