Quick Start Guide Scout SPX BalancesOhaus Corporation www.ohaus.com i Scout SPX BalancesUNPACKINGCarefully remove your Scout balance and each of its components from thepackage. Store the packaging material to ensure safe storage and future transport.Included Components: Balance Pan Quick Start Guide Calibration Mass (only for models up to 620gcapacity) Warranty Card AC Adapter & PlugSELECTING THE LOCATIONPlace on a firm, steady surface with sufficient space. Avoid excessive air current,vibrations, heat sources, or rapid temperature changes.PREPARATION FOR USEStep-1 Release the red TransportationLock on subplatform of thebalanceTurn the pointer 90 counter-clockwise.Step-2 Install the PanRectangular pan: Place diagonallyon sub-platform and rotatecounter-clockwise until it locks.Round pan: Set straight down onsubplatform.Step-3 Connect PowerConnect the AC Adapter to thebalance input jack.Battery InstallationInstall the Four “AA” (LR6)batteries (not included) withpolarity as shown in the batterycompartment.Step-4 Level the balanceLevel the balance before using byadjusting the feet until levelbubble is centerAC Adapter Jack BatteryCompartmentSubplatform TransportationLock PointerUnlockedPositionLockedPositionVisit www.scaleman.com to purchase the Ohaus Scout SPX ScalesSee the entire line of Ohaus Scales at www.balances.com