Quick Start Guide Valor™ 3000Ohaus Corporation www.ohaus.com i Valor ™ 3000 Quick Start GuidePREPARATION FOR USEBefore using the Valor 3000,Unlock the Transport Lock:1. Open the battery cover.2. Move the transport lock switch to“Unlock” position.3. Install 4 C (LR14) batteries, if desired.Reinstall the battery cover.4. To install power jack, remove sealbehind adjustable foot.SELECTING THE LOCATIONPlace on a firm, steady surface.Avoid locations with excessive air current,vibrations, heat sources, or rapid temperaturechanges.Level the scale: Adjust leveling feet so bubbleis centered.SAFETY PRECAUTIONSFor safe and dependable operation of this product, please comply with the followingsafety precautions:• Verify that the input voltage printed on the power Adapter and the plug type matchesthe local power supply.• Make sure that the power cord does not pose an obstacle or tripping hazard.• Disconnect the product from the power supply when cleaning.• Do not operate this product in hazardous or unstable environments.• Do not drop loads on the pan.• Use only approved accessories and peripherals, as available.• Operate the product only under ambient conditions specified in the Instruction Manual.• Service should be performed by authorized personnel only.Input Jack SealSeal StorageReceptacleBatteryCoverTransportLock