Oemtools 24844 Operating Instructions And Parts Manual

Oemtools 24844 Operating Instructions And Parts Manual Manual pdf 1 page image

UNPACKINGAfter unpacking unit, inspect carefully for any damage thatmay have occurred during transit. Check for loose, missing,or damaged parts. If any damage is observed, a shippingdamage claim must be filed with carrier. DO NOT use theOEMTOOLS® 1,100 Lbs. High Lift Transmission Jack withHands-Free Foot Pump if broken, bent, cracked or damagedparts (including labels) are noted. Any Transmission Jackthat appears damaged in any way, operates abnormally, or ismissing parts should be removed from service immediately.If you suspect that the Transmission Jack was subjected to ashock load (a load that was dropped suddenly, unexpectedly,etc.), immediately discontinue use until it has been checked bya factory authorized service center.Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself andothers by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personalinjury and/or damage to product or property. Please retain instructions for future reference.The following safety information is provided as guidelines to help you operate your Transmission Jack under the safest possibleconditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions arenot known or not followed. The following safety instructions are to provide the user with the information necessary for safeuse and operation. Please read and retain these instructions for the continued safe use of your Transmission Jack. Failure tofollow instructions listed below may result in serious injury. In addition, make certain that anyone who uses the equipmentunderstands and follows these safety instructions as well.Operating Instructions and Parts Manual 24844FOR CUSTOMER SERVICETechnical Question?CALL 1-866-458-2472customerservice@oem-tools.comThank you very much for choosing an OEMTOOLS® Product!For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:Model: _______________ Purchase Date: ___________Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this productbefore you begin using it. This product is designed for certain applications only. OEMTOOLS® cannot be responsible for issuesarising from modification. We strongly recommend that this product is not modified and/or used for any application other than thatfor which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have firstcontacted customer service to determine if it can or should be performed on the product.Explanation of Safety Signal WordsWARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, mayresult in property damage.NOTES: Provide clarity and helpful information.1,100 LBS. HIGH LIFT TRANSMISSIONJACK WITH HANDS-FREE FOOT PUMP17/192019 OEMTOOLS®24844WARNING