Oemtools 24993 Operating Instructions And Parts Manual
UNPACKINGAfter unpacking the OEMTOOLS™ Workshop Creeper Seat,inspect carefully for any damage that may have occurredduring transit. Check for loose, missing, or damaged parts.If any damage is observed, a shipping damage claim mustbe filed with carrier. DO NOT use Creeper Seat if broken,bent, cracked or damaged parts (including labels) arenoted. Any Creeper Seat that appears damaged in anyway, operates abnormally or is missing parts should beremoved from service immediately. If you suspect that theCreeper Seat was subjected to a shock load (a load thatwas dropped suddenly, unexpectedly, etc.), immediatelydiscontinue use until it has been checked by a factoryauthorized service center.Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself andothers by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personalinjury and/or damage to product or property. Please retain instructions for future reference.The following safety information is provided as a guideline to help you operate your product under the safest possible conditions.Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known ornot followed. The following safety instructions are to provide the user with the information necessary for safe use and operation.Please read and retain these instructions for the continued safe use of your product. Failure to follow instructions listed belowmay result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows thesesafety instructions as well.Operating Instructions and Parts Manual 24993/24994/24995/24996/24997/24998/24999FOR CUSTOMER SERVICETechnical Question?CALL 1-866-458-2472customerservice@oem-tools.comThank you very much for choosing an OEMTOOLS™ Product!For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:Model: _______________ Purchase Date: ___________Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this productbefore you begin using it. This product is designed for certain applications only. OEMTOOLS™ cannot be responsible for issuesarising from modification. We strongly recommend this product is not modified and/or used for any application other than that forwhich it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have firstcontacted customer service to determine if it can or should be performed on the product.Explanation of Safety Signal WordsWARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, mayresult in property damage.NOTES: Provide clarity and helpful information.WORKSHOPCREEPER SEAT17/182018 OEMTOOLS™WARNING24993 - Green24994 - Black24995 - White24996 - Blue24997 - Orange24998 - Red24999 - Yellow |
manualsdatabase
Your AI-powered manual search engine