Oki CX3641 MFP Module Manual
Also see for CX3641 MFP: Configuration guideHandy referenceTechnical referenceTechnical user guideTechnical reference
            |
CX3641MFPEnglish . . . 1 FranÁais . . . 4 EspaÒol . . . 7 PortuguÍs . . . 101Fax Board Installation ___________________Install the Fax Board in the UnitNoteThe fax board requires firmware server version1.1 or higher. See ìVersion:î under Server Infoin the CX3641 MFP Configuration printout.Components1 Fax Board 4 Ferrite Core2 Screws (3) 5 FCC Label3 Telephone cord1. Press and hold theSHUTDOWN/RESTART buttonon the printer control panel,and wait for the shutdownprocess to complete.2. Turn off the scanner (on/off switch is on theback right), then turn off the printer.3. If the optional finisher is installed, open therelease latch and pull it away from the printer.4. Remove the two thumbscrews from the bumperbrackets holding the printer unit to the stand,and gently pull the printer out to gain access tothe back panel.5. Loosen the two thumb screws (1) and open theaccess door.6. Insert the fax board into the printer on thelower right side.1 |
Related manuals for Oki CX3641 MFP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine