Upgrade Kit: Unimessage Pro XLite or Standalone toUnimessage Pro LAN (5 Users)This kit upgrades your Unimessage Pro XLite or Unimessage Pro Standalone software toUnimessage Pro LAN. The LAN version allows up to five users to share one MFP across a network.If you are upgrading from Unimessage Pro XLite, you also gain the ability to scan to e-mail, sendfaxes via e-mail, and make copies.Before you StartRemove the existing version of Unimessage Pro from your system:1. Click Start→ Control Panel→Add/Remove Programs.2. Select Unimessage Pro and click Add/remove to start the removal process.Note: Do not remove the printer driver.Installing Unimessage Pro LAN1. Insert the Unimessage Upgrade Kit CD-ROM into your CD-ROM drive.2. After the setup program has automatically started, select your product, then click SetupUnimessage Pro and follow the on-screen instructions.Note: If the setup program does not automatically start or Auto insert notification is turned off,click Start→→→→→Run.... Type in D:\SETUP.EXE (where D is the drive letter of your CD-ROMdrive) and click OK.3. The first screen asks you to select a language. If the highlighted language is appropriate, clickOK. Otherwise, select a language and click OK.4. Details of all the installation options can be found in the User’s Guide —click View UnimessagePro User’s Guide on the CD’s setup menu.5. When the Unimessage Pro installation is complete, you must restart your PC. When your com-puter restarts, user registration dialogs appear.6. When following the on-screen instructions, make sure you select the following when prompted:Yes, look for devices connected to this computer and install the appropriate drivers andCLASS 1 device.Status Monitor IconThe Windows printer driver for your MFP includes a status monitor, which appears in thesystem tray on the taskbar of the server. Please note the following conditions:• The status monitor must be running on the fax server PC. Never start Unimessage Pro LANunless the status monitor is running on the fax server PC.• Network clients should not run the status monitor—see the following section.continued...