DU7130F-NThis Oliveri basin is manufactured to standard AS/NZS 1172.4DU7130F-N Installation InstructionsDublinOliveri Solutions Pty Ltd ABN 12 007 551 886CARE & MAINTENANCEAvoid using abrasive or acid-based cleaning products.WARRANTYDOMESTIC USEThis basin is warranted to be free from manufacturing defects for a period of:20 years replacement parts and 1 year labour.COMMERCIAL USEThis basin is warranted to be free from manufacturing defects for a period of:7 years replacement parts and 1 year labour.Subject to the terms contained in the full warranty information available athttps://oliveri.com.au/service-and-warranty, where a genuine manufacturing defect ariseswithin the warranty period Oliveri will, at its election, repair the defect or replace theproduct.This warranty does not cover against normal wear and will be voided if theproduct is misused or not installed in accordance with these instructions.Our goods come with guarantees that cannot be excluded under the Australian ConsumerLaw. You are entitled to a replacement or refund for a major failure and for compensationfor any other reasonably foreseeable loss or damage. You are also entitled to have thegoods repaired or replaced if the goods fail to be of acceptable quality and the failure doesnot amount to a major failure.SERVICEIf the product requires servicing, please contact your installer (preferably the one whoinstalled it). If the plumber / installer is satisfied that the problem is not due to poorinstallation, contact Oliveri's nominated Warranty Service Agent for assistance on:Ph: 08 8348 6444 (choose the after sales service and warranty option)Email: warranty@oliveri.com.auFor full warranty information visit: https://oliveri.com.au/service-and-warrantyIf a warranty service call finds that the product does not have a genuinemanufacturing fault, our Warranty Service Agent reserves the right to pass on anyDU7130FSemi Inset Basin with No Tap Hole-Ncall-out fee to the householder.51 Naweena Rd, Regency Park SA 5010 P 08 8348 6444 E sales@oliveri.com.au2022-11/Version 1.0